Author Topic: SS brew bucket pressure transfer parts  (Read 1823 times)

Offline czechxpress

  • 1st Kit
  • *
  • Posts: 3
SS brew bucket pressure transfer parts
« on: February 09, 2018, 11:40:36 PM »
Hey guys,

Got a 7 gal brewmaster SS brew bucket.  To order the parts from SS to make it do a pressure transfer its around $100... anyone have a cheaper way to make it happen? 

Thanks! 

Offline BrewBama

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2723
Re: SS brew bucket pressure transfer parts
« Reply #1 on: February 10, 2018, 01:59:05 AM »
“From man’s sweat and God’s love, beer came into the world.” — St. Arnold

Brewed in the Tennessee Valley. Rocket City — Huntsville AL

Offline czechxpress

  • 1st Kit
  • *
  • Posts: 3
Re: SS brew bucket pressure transfer parts
« Reply #2 on: February 10, 2018, 09:37:02 PM »
Thanks!  Don't think you could find a cheaper way to do it. 

Offline narcout

  • Senior Brewmaster
  • ******
  • Posts: 1967
  • Los Angeles, CA
Re: SS brew bucket pressure transfer parts
« Reply #3 on: February 10, 2018, 11:05:36 PM »
Here's what I did:



There's nothing left to dismantle; the house it just collapsed on itself.  - A. Savage

Offline czechxpress

  • 1st Kit
  • *
  • Posts: 3
Re: SS brew bucket pressure transfer parts
« Reply #4 on: February 12, 2018, 03:50:17 PM »
What parts were used in the bung?  that's the best I've seen so far.

Thanks!

Offline mabrungard

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2610
  • Water matters!
    • Bru'n Water
Re: SS brew bucket pressure transfer parts
« Reply #5 on: February 12, 2018, 03:58:21 PM »
I bought a $13 gas-in fitting for a bulkhead application and fitted it to my lid. Plugging a gas line into the bung would be just about as good.
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook
https://www.facebook.com/Brun-Water-464551136933908/?ref=bookmarks

Offline narcout

  • Senior Brewmaster
  • ******
  • Posts: 1967
  • Los Angeles, CA
Re: SS brew bucket pressure transfer parts
« Reply #6 on: February 12, 2018, 06:04:14 PM »
What parts were used in the bung?  that's the best I've seen so far.

Thanks!

There are links in the thread below, but I'm not sure they are all still valid.

https://www.homebrewersassociation.org/forum/index.php?topic=20241.0

There are 3 pieces besides the stopper: a 1/4" barb to flare, a keg post adapter (screws onto the flare), and a type B gas post.  The hole on a drilled #2 stopper is too big for the 1/4" barb, so I bought a solid stopper and drilled it myself.

You could also try something like this: https://www.ebay.com/itm/Ball-Lock-Post-LIQUID-Poppet-Valve-Cornelius-Beer-Keg-Homebrew/252600608584?hash=item3ad02b6748:g:KRoAAOSwR8haaTun

But see Reply #21 in this thread: https://www.homebrewersassociation.org/forum/index.php?topic=29237.15
There's nothing left to dismantle; the house it just collapsed on itself.  - A. Savage