« previous next »
Pages: [1]   Go Down

Author Topic: False bottom for small BIAB?  (Read 1372 times)

Offline MYR

  • Cellarman
  • **
  • Posts: 31
False bottom for small BIAB?
« on: March 18, 2018, 02:59:40 PM »
Hello,
I am looking for recommendation for a small false bottom for my biab setup.
I use a SS brewtech 5.5 gal kettle for mash and boil, and I was looking into something like this, but it’s too big for my kettle:
http://www.homebrewfinds.com/2017/08/stainless-steel-false-bottom-for-biab-2.html
Any body has a good recommendation for something that would work well for me? Inside diameter is about 10”, and I need about 3” tall to clear the ball valve.
Thanks in advance!


Sent from my iPhone using Tapatalk
Logged

Offline narcout

  • Senior Brewmaster
  • ******
  • Posts: 1985
  • Los Angeles, CA
Re: False bottom for small BIAB?
« Reply #1 on: March 18, 2018, 04:03:56 PM »
I would call these guys.  I believe they fabricate false bottoms for the larger SS brewtech kettles.

http://www.norcalbrewingsolutions.com/store/index.html
Logged
There's nothing left to dismantle; the house it just collapsed on itself.  - A. Savage

Offline Bob357

  • Brewer
  • ****
  • Posts: 461
  • Consensus means nothing to me. I am who I am.
Re: False bottom for small BIAB?
« Reply #2 on: March 18, 2018, 05:59:10 PM »
+1 to Norcal. Depending on the diameter of your kettle, you might also check on cooling racks used for breads, cakes, etc. Whether you buy from them or elsewhere, Amazon is a good source for reference.
Logged
Beer is my bucket list,

Bob357
Fallon, NV

Offline MYR

  • Cellarman
  • **
  • Posts: 31
Re: False bottom for small BIAB?
« Reply #3 on: March 19, 2018, 01:36:05 AM »
Great thanks , I did not know NorCal but they seem to have plenty of nice stuff. Thanks for the advice!


Sent from my iPhone using Tapatalk
Logged

Offline klickitat jim

  • I must live here
  • **********
  • Posts: 8604
Re: False bottom for small BIAB?
« Reply #4 on: March 19, 2018, 01:43:28 AM »
Norcal is great. They have custom sized false bottoms for several popular kettles. I would suggest a dip tube to go with it. Very happy with mine
Logged

Offline MYR

  • Cellarman
  • **
  • Posts: 31
Re: False bottom for small BIAB?
« Reply #5 on: March 19, 2018, 01:43:48 AM »
Norcal have exactly what I was thinking about, made on purpose for my kettle!
Very nice! But... damn too expensive for me right now... :-(
http://www.norcalbrewingsolutions.com/store/False-Bottom-Ss-Brewing-Technologies-5.5-Gallon-Kettle.html


Sent from my iPhone using Tapatalk
Logged

Offline jpeets

  • Cellarman
  • **
  • Posts: 69
Re: False bottom for small BIAB?
« Reply #6 on: March 19, 2018, 09:26:24 PM »
 Amazon has a 10 inch rack for  pressure cookers with 2in legs on them(canning rack)
« Last Edit: March 20, 2018, 12:13:56 AM by jpeets »
Logged

Offline 802Chris

  • Assistant Brewer
  • ***
  • Posts: 151
Re: False bottom for small BIAB?
« Reply #7 on: March 21, 2018, 12:06:39 PM »
I was gonna saying canning rack bottom. should work fine if you are brewing with a bag.
Logged

Offline jpeets

  • Cellarman
  • **
  • Posts: 69
Re: False bottom for small BIAB?
« Reply #8 on: March 21, 2018, 10:55:29 PM »
And under $15 for  stainless
Logged

Offline Lazy Ant Brewing

  • Brewmaster
  • *****
  • Posts: 516
Re: False bottom for small BIAB?
« Reply #9 on: April 01, 2018, 07:41:27 PM »
I do BIAB without a false bottom and the beer turns out fine.  I'm not sure why you think you need one if you're pulling the grain bag before mashing. 
Logged
It's easier to read brewing books and get information from the forum than to sacrifice virgins to appease the brewing gods when bad beer happens!
Pages: [1]   Go Up
« previous next »