Author Topic: Inkbird ITC-310T question  (Read 433 times)

Offline Lazy Ant Brewing

  • Brewer
  • ****
  • Posts: 464
Inkbird ITC-310T question
« on: December 15, 2018, 02:37:29 PM »
Just got the controller and I am trying to set it up.  I have the temp set in Celsius and would like to switch to Fahrenheit.

How do you switch between the various functions?  I've tried to press SET again and the up and down arrows and can't seem to get beyond the temp setting.

I suppose I could work in C, but I'd like to know what the settings are on the other functions.

Thanks in advance for your help.
It's easier to read brewing books and get information from the forum than to sacrifice virgins to appease the brewing gods when bad beer happens!

Online Robert

  • Official Poobah of No Life.
  • *
  • Posts: 3679
Re: Inkbird ITC-310T question
« Reply #1 on: December 15, 2018, 02:55:23 PM »
I'm not sure if that's the one I have (can't find a model number,) but on my Inkbird, if you press and hold the set button until it gives you a flashing display to adjust with the arrows, then keep repeatedly pressing the set button,  it will cycle through all the parameters you can set, like temperature,  differentials,  alarms, and,  eventually, Fahrenheit or Celsius.  When you're finished,  press and hold the set button until it goes back to normal operating mode and the settings are saved.   Or when all else fails, read the directions. ;)
« Last Edit: December 15, 2018, 03:10:22 PM by Robert »
Rob Stein
Akron, Ohio

I'd rather have questions I can't answer than answers I can't question.

Offline hopfenundmalz

  • Global Moderator
  • I must live here
  • *****
  • Posts: 9282
  • Milford, MI
Re: Inkbird ITC-310T question
« Reply #2 on: December 15, 2018, 03:50:53 PM »
Hold the set button for 3 seconds to enter edit mode. Arrows change values up or down. A quick press on set goes to the next variable. A 3 second hold on set exits edit mode.
Jeff Rankert
Ann Arbor Brewers Guild
AHA Governing Committee
BJCP National
Home-brewing, not just a hobby, it is a lifestyle!

Offline BrewBama

  • Brewmaster General
  • *******
  • Posts: 2477
Re: Inkbird ITC-310T question
« Reply #3 on: December 15, 2018, 04:32:27 PM »
https://youtu.be/GwQ9t1ijKFI


Sent from my iPad using Tapatalk
“From man’s sweat and God’s love, beer came into the world.” — St. Arnold

Brewed in the Tennessee Valley. Rocket City — Huntsville AL

Offline Lazy Ant Brewing

  • Brewer
  • ****
  • Posts: 464
Re: Inkbird ITC-310T question
« Reply #4 on: December 19, 2018, 08:42:31 PM »
Thanks for your help.  The directions were "crap".
It's easier to read brewing books and get information from the forum than to sacrifice virgins to appease the brewing gods when bad beer happens!

Offline AzBruin

  • Cellarman
  • **
  • Posts: 33
Re: Inkbird ITC-310T question
« Reply #5 on: July 10, 2019, 01:27:54 AM »
I have to agree! Just got the wifi version of the ITC 308 to replace an older controller, and I'm still scratchin' my head over that instruction sheet!