Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Foamy Keg - Commercial, but want to resolve before corny keg  (Read 1867 times)

Offline itzfry

  • 1st Kit
  • *
  • Posts: 7
Hi All,

Super frustrated.  Had a kegerator for over 10 years.  Numerous homebrew and commercial kegs ran through it.  On the last 3 or so commercial kegs, I am having a foaming problem.  I want to resolve this before putting on a batch of homebrew IPA.   Any guidance would be great! 

Background:
- Replaced Regulator
- Moved from a 5 foot line to 10 foot line
- Using 3/16 line
- Replaced Coupler
- Same results with Picnic faucet versus tower faucet

Conditions
- 30 degrees inside
- 33 degree beer temp after pour

Results
- @ PSI 2-3 (yes, 2-3) the beer comes out mildly fast and foamy
- @ PSI 8-10 the beer comes out super fast and incredibly foamy
- Beer after foam, still tastes a bit flat.  Not sure if this is because we let it sit so long or if by pouring in a pitcher and then pouring into the glass (to manage foam) is making it taste like that. 

At this point, I am leaning to the regulator i bought is bad.  I replaced that for other reasons earlier on.  When the faucets didnt change the outcome, I changed the coupler.

Thoughts ??? HELP!

John


Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #1 on: May 09, 2019, 03:55:40 pm »
It does sound like the regulator, especially if the timing lines up. Another option is that if your thermometer is even a couple degrees off you could be getting ice crystals in the lines.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline itzfry

  • 1st Kit
  • *
  • Posts: 7
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #2 on: May 10, 2019, 06:25:38 am »
Great, thanks...  I am going to move my lines closer to the door and replace the regulator. 

Any other thoughts from others I could consider would be helpful as well...

Thanks all

John

Offline MNWayne

  • Brewer
  • ****
  • Posts: 447
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #3 on: May 10, 2019, 07:00:35 am »
Give all lines, connections and tap a thorough cleaning. A restriction could be whipping the co2 out of solution.
Far better to dare mighty things....

Offline itzfry

  • 1st Kit
  • *
  • Posts: 7
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #4 on: May 10, 2019, 03:33:11 pm »
Thanks MNWayne.  Worth noting, I clean lines / Faucet after each keg.  When I moved to a 10 foot line, I actually cut a new piece of bev line so its fresh and new.

Any other suggestions to consider from this great community?!

THANKS!

Offline TeeDubb

  • Assistant Brewer
  • ***
  • Posts: 117
  • San Jose, CA
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #5 on: May 11, 2019, 02:41:24 pm »
Going back to your original posting: The thing that changed seems to be the 'last three commercial kegs.' Were they all the same brewery?  Perhaps they arrived / were packaged over-carbonated?  Easy check: after settling on a stable temperature over a few days, what was the measured keg pressure as rec'd? Check that vs. a carbonation chart for your kegerator temperature.

Besides the regulator, I would also check or replace the pressure gauge. Some are very cheap and fail over time. Let us know what you find!

Offline itzfry

  • 1st Kit
  • *
  • Posts: 7
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #6 on: May 12, 2019, 12:53:02 pm »
Thanks TeeDub.

Two questions:
- They were from different breweries but how do you measure keg pressure as received?  Is there an easy way to do that?

- If replacing entire regulator, I would be replacing the pressure guage or are you referring to something else?

THANKS! 

Note:  New regulator in mail...

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #7 on: May 12, 2019, 01:52:54 pm »
- If replacing entire regulator, I would be replacing the pressure guage or are you referring to something else?

You can definitely order a regulator body separate from the gauge, but odds are you're getting both.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline TeeDubb

  • Assistant Brewer
  • ***
  • Posts: 117
  • San Jose, CA
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #8 on: May 12, 2019, 09:14:38 pm »
- They were from different breweries but how do you measure keg pressure as received?  Is there an easy way to do that?

OK - the different breweries pretty much cancels out the probability of over carbonation being your issue. To measure as-received keg carbonation level (and pressure), I would let the keg temperature stabilize for a few days in your fridge. Then just connect your tap and regulator, but don't turn on the CO2 bottle. One of the 2 gauges on your regulator will show the keg pressure after you connect. Then check against a carbonation chart.

Wish I could help more - will think about it. Replacing the regulator and gauges is a good step.

Offline itzfry

  • 1st Kit
  • *
  • Posts: 7
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #9 on: May 15, 2019, 08:43:38 am »
Thanks for the clarification.

I will plug up regulator and keep C02 tank off and see what the read is before I get started.

Question - can a long line (that is unneeded) make foam?  I wonder if I need to go back to the shorter line now that I got a new regulator to hook up?  Last pour did seem to sputter a bit which I assumed was because of the length.

Thoughts?

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #10 on: May 15, 2019, 08:57:36 am »
Thanks for the clarification.

I will plug up regulator and keep C02 tank off and see what the read is before I get started.

Question - can a long line (that is unneeded) make foam?  I wonder if I need to go back to the shorter line now that I got a new regulator to hook up?  Last pour did seem to sputter a bit which I assumed was because of the length.

Thoughts?

In general, a longer line should reduce foam. 
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline itzfry

  • 1st Kit
  • *
  • Posts: 7
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #11 on: May 26, 2019, 07:16:43 pm »
Update:

- Changed out regulator, still foamy at first
- I kept the PSI at 10 and kept running beers
- After about 10-15 pours (not one after another, just on and off), beers started pouring perfect

I am going to try another keg but I think that my regulator (which was NEWLY ordered/installed) was bad off the jump.  I think it took some beers to level off the pressure it mistakenly put in.  We will test again next post.

Thanks for all the help on this topic - will update everyone!

John

Offline itzfry

  • 1st Kit
  • *
  • Posts: 7
Re: Foamy Keg - Commercial, but want to resolve before corny keg
« Reply #12 on: July 04, 2019, 10:18:41 am »
CONFIRMED - The regulator was bad.  This is a good example of not taking for granted how new your equipment is.  I tried so many other things before changing out the item that was the newest!  Thanks everyone for the ideas and support.  Hopefully this thread helps someone else!