Author Topic: ppg of rye malt  (Read 565 times)

Offline Iliff Ave

  • Official Poobah of No Life.
  • *
  • Posts: 4071
ppg of rye malt
« on: July 08, 2019, 02:41:59 PM »
I'm seeing anywhere from 29 to 38 ppg for rye malt. Anyone have an accurate figure?
On Tap/Bottled: IPL, Kolsch, bitter, Czech pils

Fermenting:
Up Next: amber lager, Italian pils

Offline Bob357

  • Brewmaster
  • *****
  • Posts: 589
  • Consensus means nothing to me. I am who I am.
Re: ppg of rye malt
« Reply #1 on: July 08, 2019, 02:46:10 PM »
That would depend on the maltster and sometimes, even the lot. Getting the information from the maltster's web site will get you where you need to be.
Beer is my bucket list,

Bob357
Fallon, NV

Big Monk

  • Guest
Re: ppg of rye malt
« Reply #2 on: July 08, 2019, 02:54:45 PM »
I'm seeing anywhere from 29 to 38 ppg for rye malt. Anyone have an accurate figure?

I have about 3 years worth of saved MA data for Weyermann Pale Rye. Here is the average:

Fine Grind (Dry Basis) - 82.0% (1.038)
Moisture Content - 5.41%   
Fine Grind (As-Is) - 77.5% (1.036)

I imagine the lower end of what you are seeing may be flaked rye.

Offline Iliff Ave

  • Official Poobah of No Life.
  • *
  • Posts: 4071
Re: ppg of rye malt
« Reply #3 on: July 08, 2019, 02:57:41 PM »
I'm seeing anywhere from 29 to 38 ppg for rye malt. Anyone have an accurate figure?

I have about 3 years worth of saved MA data for Weyermann Pale Rye. Here is the average:

Fine Grind (Dry Basis) - 82.0% (1.038)
Moisture Content - 5.41%   
Fine Grind (As-Is) - 77.5% (1.036)

I imagine the lower end of what you are seeing may be flaked rye.

Thank you. I will likely be using Weyermann so that is very helpful.
On Tap/Bottled: IPL, Kolsch, bitter, Czech pils

Fermenting:
Up Next: amber lager, Italian pils

Big Monk

  • Guest
Re: ppg of rye malt
« Reply #4 on: July 08, 2019, 03:02:15 PM »
I'm seeing anywhere from 29 to 38 ppg for rye malt. Anyone have an accurate figure?

I have about 3 years worth of saved MA data for Weyermann Pale Rye. Here is the average:

Fine Grind (Dry Basis) - 82.0% (1.038)
Moisture Content - 5.41%   
Fine Grind (As-Is) - 77.5% (1.036)

I imagine the lower end of what you are seeing may be flaked rye.

Thank you. I will likely be using Weyermann so that is very helpful.

I would use the Fine Grind (As-Is) % for extract calculations.