Membership questions? Log in issues? Email

Author Topic: fermentation chamber performance  (Read 2855 times)

Offline kennyan

  • 1st Kit
  • *
  • Posts: 2
fermentation chamber performance
« on: September 15, 2011, 07:33:11 pm »
Ive recently completed a fermentation chamber build.  I build a box around a mini fridge such as this:

lined the box with 2 inch thick, r10 foam board, sealed all cracks with spray foam, then taped all joints/spray foam areas with aluminum tape.  The inside of the box measures 41 inches long, 26 inches wide, 29 inches tall on the inside.  It is temp controlled by a johnson controller.  I turned it on this morning and set the controller to 34 degrees to see how it would handle it.  About 9 hours later, i checked it and it was at 42 degrees.  I dont beleive it ever got down to 34.  Id like to crash cool around 34, but its looking like that wont be possible.  Is this about the normal limits of mini fridge builds like these?  Im just curious how others perform.  I don't currently have any fans in the chamber, think that would help to circulate the air?


Offline mortox

  • 1st Kit
  • *
  • Posts: 1
Re: fermentation chamber performance
« Reply #1 on: September 16, 2011, 07:53:57 am »

Offline euge

  • I must live here
  • **********
  • Posts: 8017
  • Ego ceruisam ad bibere cervisiam
Re: fermentation chamber performance
« Reply #2 on: September 16, 2011, 12:28:30 pm »
Try a fan and pics would be nice.
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Laws are spider-webs, which catch the little flies, but cannot hold the big ones. -Anacharsis

Offline Jimmy K

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3643
  • Delaware
Re: fermentation chamber performance
« Reply #3 on: September 16, 2011, 01:47:14 pm »
I don't think most refrigerators are built to cool down to 34 degrees as very few goods are really stored that cold. I just don't think they are strong enough.  High outside temps will make it work harder.  A fan will definately help and make sure the temperature probe is not near the cooling parts.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline Mark G

  • Brewmaster
  • *****
  • Posts: 898
  • Huntley, IL
Re: fermentation chamber performance
« Reply #4 on: September 16, 2011, 01:49:53 pm »
Did you test it to see if it would get that cold before you added the ferm chamber? If so, then a fan would help somewhat.
Mark Gres

Offline jimrod

  • Assistant Brewer
  • ***
  • Posts: 181
Re: fermentation chamber performance
« Reply #5 on: September 25, 2011, 01:15:13 am »
Yes, 42 is about the best you can get with a mini fridge. Even some semi expensive kegerators only get to 40-42.
The liver is evil and must be punished

Offline James Lorden

  • Brewer
  • ****
  • Posts: 337
  • Forest Hill, MD
Re: fermentation chamber performance
« Reply #6 on: October 04, 2011, 09:52:48 am »
The chamber that I built on an old wine fridge holds two carboys and I can get it down to about 38 degrees there is a computer fan int there as well.

James Lorden
Beer Drinker Beer Maker & Beer Judge