Author Topic: Calcium Levels  (Read 171 times)

Offline Megary

  • Assistant Brewer
  • ***
  • Posts: 178
Calcium Levels
« on: December 05, 2019, 12:36:41 AM »
Not sure where to post this.  There really should be a Water category!

Asking for any and all real life experience with different Calcium water levels.  I have read Palmer's recommendation of 50-150ppm but I'm curious if anyone has found that pushing the extremes of that range has led to different results (flavor, clarity etc.)

Or maybe those numbers are old news and really the range is now considered something else?

Thanks in advance.

Offline hopfenundmalz

  • Global Moderator
  • I must live here
  • *****
  • Posts: 9573
  • Milford, MI
Re: Calcium Levels
« Reply #1 on: December 05, 2019, 12:52:25 AM »
You can go lower for lagers, as time and low temps will clear the beer. The current thinking is that 30 ppm or more is sufficient for lagers, ales are 50 ppm or more
Jeff Rankert
AHA Governing Committee
AHA Lifetime Member
BJCP National
Ann Arbor Brewers Guild
Home-brewing, not just a hobby, it is a lifestyle!

Offline goose

  • Brewmaster
  • *****
  • Posts: 503
Re: Calcium Levels
« Reply #2 on: December 05, 2019, 02:53:31 PM »
I kind of depends on the water profile for the specific beer you are brewing.  I normally go by what Bru'n Water tells me for the specific profile.  That said, Jeff's posted calcium levels are a pretty good start.  I don't think I have ever gone above 70 ppm for an ale
Goose Steingass
Wooster, OH
Society of Akron Area Zymurgists (SAAZ)
Wayne County Brew Club
Mansfield Brew Club
BJCP Certified
AHA Governing Committee Member