Author Topic: Keg Coupler  (Read 237 times)

Offline McHill Brewing

  • 1st Kit
  • *
  • Posts: 1
Keg Coupler
« on: July 27, 2021, 01:38:18 AM »
Hi, new owner of a kegerator here! I ordered a Bev Rite Keg Coupler (D System with SS304 Probe.) I have no idea how to install it! It seems like I will need to cut my liquid and gas lines and clamp them down to the coupler, is this more of a “permanent” coupler? Sorry if my question sounds dumb! What I had been looking for was a quick sanke adapter that allowed me to use my ball lock quick connects and move back and forth between home brew and commercial, but I’m not sure this is the right tool for that.

Offline ynotbrusum

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4201
Re: Keg Coupler
« Reply #1 on: July 27, 2021, 10:30:20 AM »
Hodge Garage Brewing: "Brew with a glad heart!"

Offline kramerog

  • Brewmaster General
  • *******
  • Posts: 2173
    • My LinkedIn page
Re: Keg Coupler
« Reply #2 on: July 28, 2021, 05:48:09 PM »
One way to do it:

https://www.kegoutlet.com/sanke-couple-to-corny-ball-lock-adapter-set.html

Cheers!

Since I have corny connectors on my gas supply, I find it very helpful to have a corny gas connector on my sanke.