Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Malteurop 2 row stat sheet  (Read 2685 times)

Offline passlaku

  • Assistant Brewer
  • ***
  • Posts: 187
Malteurop 2 row stat sheet
« on: September 25, 2010, 06:51:01 pm »
I bought a sack of Malteurop 2 row from RebelBrewer and was wanting to enter it into BeerSmith.  I was wondering if anyone had "yield/properties" information on this malt. 

Thanks.

Offline thcipriani

  • Assistant Brewer
  • ***
  • Posts: 191
Re: Malteurop 2 row stat sheet
« Reply #1 on: September 26, 2010, 09:41:27 pm »
I found this on the Rebel Brewer site which I'm sure you saw:

Moisture: 4.4%
Total Nitrogen: 11-12%
Extract: 79-80%
Soluble Nitrogen Ratio: 37-44%

If we were to assume that 79-80% number was fine-grind dry-basis it'd represent 79.5% the potential extract of sucrose which is 46 points/pound/gallon so you'd be looking at 1.036 or 1.037 somewhere in there.

The SNR number reaches to the high end of what you'd like to see but should be fine.

The weird number here is total nitrogen - I think Rebel Brewer meant to write total protein. If not that is one point of which to be aware. According to Noonan, "For all-malt beers, protein values exceeding 12% (1.9% TN) indicate that the beer may haze or present mash runoff problems. European lager and British ale malts are usually below 10% protein." (http://www.brewingtechniques.com/bmg/noonan.html)

Hit up Rebel Brewer - they obviously have the total report - I can't find any info about this malt floating in the ether of the internet.

Tyler Cipriani
Longmont, CO
http://gangsta.party/