Author Topic: So I;m coverting an old fridge into a kegerator....  (Read 1037 times)

Offline whitey

  • Cellarman
  • **
  • Posts: 76
    • View Profile
So I;m coverting an old fridge into a kegerator....
« on: October 06, 2010, 03:34:00 PM »
and I wanted opinions from you....

CO2 tank,,,inside the fridge or outside?
Kegged:
Oatmeal Stout
Doppelbock
ESB
Vienna Lager
Belgian Wheat
Heffeweizen

Bottled:

Offline rabid_dingo

  • Brewmaster
  • *****
  • Posts: 785
  • Brighton, CO :D
    • View Profile
    • Mile High Monks
Re: So I;m coverting an old fridge into a kegerator....
« Reply #1 on: October 06, 2010, 03:36:02 PM »
it depends on how much room you have to spare and how much work you want to put into it. If you don't mind the
work and need the space, outside. If you have room to spare and don't want to put another hole in the fridge inside.

Personally, I have mine outside. It lets me fit 4 cornies in there.
Ruben * Colorado :)

Offline whitey

  • Cellarman
  • **
  • Posts: 76
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #2 on: October 06, 2010, 03:44:46 PM »
Thats what I'm thinking of too. So there isn't any impact on the longevity of the CO2 in the tank outside vs inside?
Kegged:
Oatmeal Stout
Doppelbock
ESB
Vienna Lager
Belgian Wheat
Heffeweizen

Bottled:

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 13290
  • Noti OR [1991.4, 287.6deg] AR
    • View Profile
    • Dennybrew
Re: So I;m coverting an old fridge into a kegerator....
« Reply #3 on: October 06, 2010, 03:53:15 PM »
So there isn't any impact on the longevity of the CO2 in the tank outside vs inside?
None whatsoever.  The gauge reads differently if it's inside, but the actual amount of CO2 in the tank doesn't change.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

Offline bluesman

  • Global Moderator
  • I must live here
  • *****
  • Posts: 8808
  • Delaware
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #4 on: October 06, 2010, 06:01:04 PM »
So there isn't any impact on the longevity of the CO2 in the tank outside vs inside?
None whatsoever.  The gauge reads differently if it's inside, but the actual amount of CO2 in the tank doesn't change.

+1

except for the space issue. More space when it's outside.
Ron Price

Offline tschmidlin

  • I must live here
  • **********
  • Posts: 8195
  • Redmond, WA
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #5 on: October 06, 2010, 08:58:05 PM »
So there isn't any impact on the longevity of the CO2 in the tank outside vs inside?
None whatsoever.  The gauge reads differently if it's inside, but the actual amount of CO2 in the tank doesn't change.
Like Denny said, it makes no difference - for beer purposes ;)  The primary gauge reads the vapor pressure in the canister, which varies with temperature.  But it really doesn't make a difference if the primary gauge reads 900 psi (around 75F) or 500 psi (around 30F), since both are well above anything you'll be putting on your beer.  If you were trying to pressurize something to 700 psi then it would make a difference, but since kegs can only handle about 120 psi you don't need to worry about it.
Tom Schmidlin

Offline 4swan

  • Cellarman
  • **
  • Posts: 36
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #6 on: October 07, 2010, 05:58:43 AM »
Is there any safety issues with a CO2 tank on the outside in a garage during the summer in the South?  I've recently moved to Louisiana and was thinking of building a kegerator and in might be in the garage.

Offline tumarkin

  • Brewmaster
  • *****
  • Posts: 621
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #7 on: October 07, 2010, 07:22:21 AM »
Is there any safety issues with a CO2 tank on the outside in a garage during the summer in the South?  I've recently moved to Louisiana and was thinking of building a kegerator and in might be in the garage.

No safety issue as far as reasonable summer temps (my garage in FL gets quite hot). The big safety issue with CO2 tanks, at any temp, is for them to get knocked over and break the regulator. Worst case they turn into a big bottle rocket.... scary!  Putting a safety cage around the regulator is a good move.
Mark Tumarkin
Hogtown Brewers
Gainesville, FL

Offline wingnut

  • Brewer
  • ****
  • Posts: 297
  • Plainwell MI
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #8 on: October 07, 2010, 07:23:27 AM »
One other thing that I have been pondering about my Keg-Fridge conversion...and it may apply here... How do the Fridge shelves tend to hold up to 5 gallon kegs? 

I ask because at present, I have my kegs sitting on the bottom of the Fridge (not on shelves).  However, with the compressor hump, I can only fit three kegs across.  If I used the shelving system of the Fridge, however, I could sit the kegs on the shelves of the Fridge and I could fit 6 easily then...   :o  (and in my story a ray of light from heaven shines down upon my fridge...  ;D)

My concern is that even though the shelves only span half way across (so I wind up with 4 brackets supporting the weight), with 6 kegs (or even three), that seems like a lot of leverage on the shelf supports!   (Figure about 40 to 45Lb per keg... and suddenly I am expecting the shelves to hold a grown man!)

Anyone with experience on how much weight the shelves in Fridges tend to be able to hold?


-- Wingnut - Cheers!

Offline ryang

  • Brewer
  • ****
  • Posts: 429
  • Indian Hills CO
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #9 on: October 07, 2010, 07:30:22 AM »
are the racks you speak of metal wire or plexiglass?  what material?  I would presume the brackets are plenty strong to support the weight, then just throw a piece of plywood/composite wood down to keep the racks from cracking/bending/etc

Offline micsager

  • Senior Brewmaster
  • ******
  • Posts: 1124
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #10 on: October 07, 2010, 07:54:53 AM »
One other thing that I have been pondering about my Keg-Fridge conversion...and it may apply here... How do the Fridge shelves tend to hold up to 5 gallon kegs? 

I ask because at present, I have my kegs sitting on the bottom of the Fridge (not on shelves).  However, with the compressor hump, I can only fit three kegs across.  If I used the shelving system of the Fridge, however, I could sit the kegs on the shelves of the Fridge and I could fit 6 easily then...   :o  (and in my story a ray of light from heaven shines down upon my fridge...  ;D)

My concern is that even though the shelves only span half way across (so I wind up with 4 brackets supporting the weight), with 6 kegs (or even three), that seems like a lot of leverage on the shelf supports!   (Figure about 40 to 45Lb per keg... and suddenly I am expecting the shelves to hold a grown man!)

Anyone with experience on how much weight the shelves in Fridges tend to be able to hold?



I built a shelf with 2X4's and plywood for this very reason.

Offline tschmidlin

  • I must live here
  • **********
  • Posts: 8195
  • Redmond, WA
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #11 on: October 07, 2010, 08:35:56 AM »
I built a shelf with 2X4's and plywood for this very reason.
Exactly, build your own shelf and support it on the bottom of the fridge.  It works well.
Tom Schmidlin

Offline cheba420

  • Brewer
  • ****
  • Posts: 346
  • Can I get a beer up in here?
    • View Profile
    • The Beer Research Institute
Re: So I;m coverting an old fridge into a kegerator....
« Reply #12 on: October 07, 2010, 09:39:44 AM »
I prefer to keep it outside to conserve the space. If you cant get a cage to protect it a chain anchored to the wall will work out just fine.Just anchor it to the wall on one end and then wrap it around the cylinder back to where its anchored. Either way, make sure that thing's secured so you dont have a rocket going through one of your walls!!!
Matt
Mesa, AZ.
#197645

On Tap: Vanilla Porter, Belgian Blonde, Saison, Black IPA, Punkin Porter
Primary: Pale 31 Clone, Raspberry Cider
Secondary: Vanilla Porter
Conditioning: Brett IPA
Bottles:Mosaic Wheat
On Deck: Flanders Red, Berliner weisse, Punkin Saison, Saison Brett

Offline Slowbrew

  • Senior Brewmaster
  • ******
  • Posts: 1931
  • The Slowly Losing IT Brewery in Urbandale, IA
    • View Profile
Re: So I;m coverting an old fridge into a kegerator....
« Reply #13 on: October 07, 2010, 01:14:47 PM »
I prefer to keep it outside to conserve the space. If you cant get a cage to protect it a chain anchored to the wall will work out just fine.Just anchor it to the wall on one end and then wrap it around the cylinder back to where its anchored. Either way, make sure that thing's secured so you dont have a rocket going through one of your walls!!!
Anybody else get a visual from this description of BA knocking the valve off a CO2 tank to take out a bad guys tank?  Probably just me...  If that happened in my basement it would ricochet around for awhile.  All poured concrete walls.

Back to being at least a little more serious, it is a good idea to secure the tank if it's outside the fridge.  Mine is outside but I built the whole kegorator on a platform with wheels so I could move it easily (if you're picking out the casters without really thinking about load limits and such, decide which ones you want and then buy the next size up.  It will save you buying them twice  ;) ).  I incorporated a tank mounting area into the platform.

Paul
Where the heck are we going?  And what's with this hand basket?