Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Water Analysis  (Read 2314 times)

Offline oscarvan

  • Senior Brewmaster
  • ******
  • Posts: 1707
Water Analysis
« on: December 21, 2010, 07:21:14 pm »
As I move in to AG, I need to know what I have as far as water is concerned. I called the water lab at city hall and all they measure is total hardness. I need more.

Where is the best deal to mail in a sample for an analysis?
Wooden Shoe Brew Works (not a commercial operation) Bethlehem, PA
http://www.woodenshoemusic.com/WSBW/WSBW_All_grain_Setup.html
I brew WITH style..... not necessarily TO style.....

Offline hopfenundmalz

  • Global Moderator
  • I must live here
  • *****
  • Posts: 10675
  • Milford, MI
Re: Water Analysis
« Reply #1 on: December 21, 2010, 07:27:30 pm »
I was happy with Ward Labs, test W-6, $16.50, plus shipping ( I used a USPS flat rate box for 2 different water sources).
Jeff Rankert
AHA Lifetime Member
BJCP National
Ann Arbor Brewers Guild
Home-brewing, not just a hobby, it is a lifestyle!

Offline oscarvan

  • Senior Brewmaster
  • ******
  • Posts: 1707
Re: Water Analysis
« Reply #2 on: December 21, 2010, 07:34:23 pm »
Cool, water sample bottle requested.
Wooden Shoe Brew Works (not a commercial operation) Bethlehem, PA
http://www.woodenshoemusic.com/WSBW/WSBW_All_grain_Setup.html
I brew WITH style..... not necessarily TO style.....

Offline tschmidlin

  • I must live here
  • **********
  • Posts: 8198
  • Redmond, WA
Re: Water Analysis
« Reply #3 on: December 22, 2010, 02:14:50 am »
In the future you can just take any old water bottle you have lying around, rinse it with your brewing water a few times to wash away whatever had been in the bottle, then put some brewing water in it and mail it to them.
Tom Schmidlin

Offline mabrungard

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2901
  • Water matters!
    • Bru'n Water
Re: Water Analysis
« Reply #4 on: December 23, 2010, 10:08:55 am »
Tom is correct, almost any water-tight container will do.  The thing I want to add is that you only need to send a small amount of water.  I recently sent my samples in to Ward using old White lab yeast vials.  It was enough water.  You don't won't to pay a bunch to ship water, do you?
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://www.brunwater.com/

Like Bru'n Water on Facebook
https://www.facebook.com/Brun-Water-464551136933908/?ref=bookmarks

Offline tomsawyer

  • Senior Brewmaster
  • ******
  • Posts: 1694
Re: Water Analysis
« Reply #5 on: December 23, 2010, 01:04:18 pm »
Related question, how much does a municipal water supply's mineral content vary from month to month?  Say it was coming from a river, I assume this would be more subject to seasonal variation than a reservoir or aquifer.

Oscar, as a first step you might try adding a 1/2tsp of calcium chloride of sulfate and look at how that changes your breaks.  If you see an improvement, you probably do need to adjust your water.  also, based on knowing if your water is relatively hard or not, you can make some initial assumptions about what you'll need to add.
Lennie
Hannibal, MO

Offline mabrungard

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2901
  • Water matters!
    • Bru'n Water
Re: Water Analysis
« Reply #6 on: December 23, 2010, 02:17:10 pm »
Surface water source water quality can vary significantly since they represent a combination of groundwater (that seeps into the lake or stream) and rainwater that runs off the land.  The mineralization of these waters can vary with each rainfall event (or lack of rainfall). 

If you're dealing with a source that can vary, I would recommend getting an aquarium test kit that includes hardness and alkalinity analyses.  I think Kai has some information on this at his website.  The are cheap ($10 to $12 I think).  Don't get test strips, get a kit or kits that have colormetric chemicals that you add to the sample and compare to a color strip.  I think they are more accurate and easy to read.

Once you have benchmarked your water quality with lab testing and have performed a corresponding aquarium test, you can then have an idea of how to adjust your water to overcome the variability. 
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://www.brunwater.com/

Like Bru'n Water on Facebook
https://www.facebook.com/Brun-Water-464551136933908/?ref=bookmarks

Offline oscarvan

  • Senior Brewmaster
  • ******
  • Posts: 1707
Re: Water Analysis
« Reply #7 on: December 28, 2010, 02:12:14 pm »
Well, no known complaints about hardness from the general community, and no problems brewing yet, and no loud complaints from the brew club. I'll get an analysis, monitor mash PH and take it from there.
Wooden Shoe Brew Works (not a commercial operation) Bethlehem, PA
http://www.woodenshoemusic.com/WSBW/WSBW_All_grain_Setup.html
I brew WITH style..... not necessarily TO style.....

Offline brian-d

  • 1st Kit
  • *
  • Posts: 23
Re: Water Analysis
« Reply #8 on: January 02, 2011, 07:58:29 am »
I am from the Denver, CO area and was wondering if anyone knows about the water profile here?  Does it require any preparation for Ag brewing?  I have an on board water filter for my brew stand I recently ordered.  Should I filter my water for brewing?  Thanks very much.