Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Vanilla in a porter  (Read 4232 times)

Offline bonjour

  • Senior Brewmaster
  • ******
  • Posts: 1791
  • Troy, MI, 37mi, 60.9deg AR
Vanilla in a porter
« on: November 26, 2009, 09:01:31 pm »
I've never brewed with the stuff, perhaps because my first vanilla beer was like drinking the extract bottle.
How much, for how long and how should I induce the flavor to 5 gal of robust porter

Thanks

Fred
Fred Bonjour
Co-Chair Mashing in Michigan 2014 AHA Conference in Grand Rapids, Michigan
AHA Governing Committee; AHA Conference, Club Support & Web Subcommittees



Everything under 1.100 is a 'session' beer ;)

Offline tygo

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2622
  • Sterling, VA
Re: Vanilla in a porter
« Reply #1 on: November 26, 2009, 09:05:08 pm »
When I brewed Denny's BVIP a while back a did two vanilla seeds in the secondary for two weeks.  I'll say that it was maybe a little over the top on vanilla flavor but not by much.  I think if I did it again maybe I'd decrease the time.

Edit - Just realized I quoted Denny's recipes twice in a short amount of time.  Not sucking up here, I was just on TB at the time I brewed them and was happy with the results!  But yes, I shamelessly copied the recipes.
« Last Edit: November 26, 2009, 09:09:37 pm by tygo »
Clint
Wort Hogs

Offline bonjour

  • Senior Brewmaster
  • ******
  • Posts: 1791
  • Troy, MI, 37mi, 60.9deg AR
Re: Vanilla in a porter
« Reply #2 on: November 26, 2009, 09:09:16 pm »
Good to know but there will be no bourbon in this beer so the vanilla should come thru differently

Fred
Fred Bonjour
Co-Chair Mashing in Michigan 2014 AHA Conference in Grand Rapids, Michigan
AHA Governing Committee; AHA Conference, Club Support & Web Subcommittees



Everything under 1.100 is a 'session' beer ;)

Offline tygo

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2622
  • Sterling, VA
Re: Vanilla in a porter
« Reply #3 on: November 26, 2009, 09:13:02 pm »
Not sure how much vanilla you're going for here but if you're just looking for a hint I'd think that going with one bean might be best.
Clint
Wort Hogs

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Vanilla in a porter
« Reply #4 on: November 26, 2009, 09:17:56 pm »
If the beans are fresh and/or high quality, I would start with one. Two is just overkill IME. I just split them lengthwise and chop into a few pieces, then add to the secondary. I would start tasting after a week but depending on how much vanilla flavor you want, it will probably be 2-3 in the secondary.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Online denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Vanilla in a porter
« Reply #5 on: November 27, 2009, 10:24:20 am »
Good to know but there will be no bourbon in this beer so the vanilla should come thru differently

Fred

There's no bourbon in my recipe until well after the beans have been in, so I'm pretty familiar with how just the vanilla tastes.  I use 2 fresh beans.  I split then lengthwise, scrape out all the seeds inside, chop the pods into 2-3 in. pieces, and add it all. seeds and pods, to the secondary.  I leave it anywhere from a week to 2 weeks, tasting along the way til it's where I like it.  I generally let it go til it's a bit on the heavy side since it fades quickly, I've found.  The vanilla should complement the beer, not make you go "WOW, VANILLA!"
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline bonjour

  • Senior Brewmaster
  • ******
  • Posts: 1791
  • Troy, MI, 37mi, 60.9deg AR
Re: Vanilla in a porter
« Reply #6 on: November 27, 2009, 10:38:25 am »
Thanks Denny,

This will be for my daughters wedding and she doesn't like bourbon beers, but loves vanilla porters


Fred
Fred Bonjour
Co-Chair Mashing in Michigan 2014 AHA Conference in Grand Rapids, Michigan
AHA Governing Committee; AHA Conference, Club Support & Web Subcommittees



Everything under 1.100 is a 'session' beer ;)

Offline babalu87

  • Brewmaster
  • *****
  • Posts: 831
  • Grand Brewbah
Re: Vanilla in a porter
« Reply #7 on: November 27, 2009, 12:30:02 pm »
I generally let it go til it's a bit on the heavy side since it fades quickly, I've found.  The vanilla should complement the beer, not make you go "WOW, VANILLA!"

The good thing about too much vanilla is it fades given some time.
Jeff

On draught:
IIPA, Stout, Hefeweizen, Hallertau Pale Ale, Bitter

Primary:
Hefeweizen,Berliner Weisse, Mead

Offline hamiltont

  • Brewmaster
  • *****
  • Posts: 988
  • Location: Eastern Nebraska
Re: Vanilla in a porter
« Reply #8 on: November 27, 2009, 12:34:19 pm »
Thanks Denny,

This will be for my daughters wedding and she doesn't like bourbon beers, but loves vanilla porters


Fred

If you're kegging it you can always add more in the keg.  A stainless steel tea ball works great!!  It's also a nice way to freshen up the vanilla flavor if the keg sits around longer than planned.
If Homebrew & BBQ aren't the answer, then you're askin' the wrong questions... Cheers!!!

Offline bluesman

  • I must live here
  • **********
  • Posts: 8825
  • Delaware
Re: Vanilla in a porter
« Reply #9 on: November 30, 2009, 12:43:47 pm »
I just racked some of Denny's VBIP into the secondary over 3 Madagasgar Vanilla Bean pods that were scraped. First time making this beer. It sure tastes great out of the hydrometer tube....and those vanilla beans smell wonderful.  8)

At first I thought my finishing gravity of 1.024 was high until I remembered that I started at 1.089 AND the amount of unfermentables was significant in the recipe.
« Last Edit: November 30, 2009, 02:13:31 pm by bluesman »
Ron Price

Online denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Vanilla in a porter
« Reply #10 on: November 30, 2009, 12:55:34 pm »
1.024 is right on the money.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline bluesman

  • I must live here
  • **********
  • Posts: 8825
  • Delaware
Re: Vanilla in a porter
« Reply #11 on: November 30, 2009, 02:14:36 pm »
1.024 is right on the money.

That's good to know. This beer has some horsepower...let me tell you.  8)
Ron Price