[crossposted from another forum where it did not get any response...]
Got a question that I hope I will not need an answer to, but figured I'd ask it, get some responses, and be ready to act if I need to:
I made a 10 gal batch of 1.054 Budvar clone (Czech Pils) and as usual with my 10 gal batches, split it into two fermenters to fit in my fridge. I pitched two 11g packs of S-189 dry Swiss lager yeast into each fermenter (I did not rehydrate it, but I've been using US-05 in this way for a while and never had problems.) I pitched at 52F, and aerated with a mixstir after pitching. I usually go for 4 minutes in each fermenter, with my cordless drill on HI to get a good vortex going. Here is where the problem came in. While aerating the 2nd fermenter, the battery started dying and I just kind of let it run out, therefore aerating the 2nd fermenter only about 90 seconds, maybe 2 minutes max. I figured it would be OK.
Anyways, after 8 days of fermentation at 52F, the second fermenter has clearly been lagging, at least judging by airlock activity. I checked the gravity and the 1st fermenter was down to 1.032 but the second is only 1.042. Today, after 10 days fermenting, the 1st ferm is still bubbling away and the 2nd one is just dead.
So here is the question: assuming, after I let them both ferment another week or so in primary, and assuming that the one fermenter is down to where I want my FG (maybe 1.012-1.014) and the bad batch is stuck around 1.020 or 1.025 or even higher, can I do the following: rack the good beer into a secondary for lagering, and rack the stuck beer onto the good yeast cake left from the first?
I don't want to get into adding Beano, or making a big starter (I don't have any liquid yeast on hand). But I thought this might be a good way of firing up the second batch again: I know there will be fermentables in there, because the wort was the same in both fermenters, in fact everything is identical except the "bad" fermenter was not aerated nearly as much as the "good" one.
The other thing I thought of was just blending the two batches at kegging time. Of course I'll wait a week and see what develops, but I thought I'd toss the question out and solicit some answers.
Enjoy the holiday weekend!