Author Topic: Gravity readings  (Read 814 times)

Offline quest4watneys

  • Assistant Brewer
  • ***
  • Posts: 129
  • Indianapolis, IN
    • View Profile
Gravity readings
« on: January 16, 2011, 08:36:24 AM »
If I use a glass carboy for primary fermentation, how do I take periodic gravity readings without introducing oxygen to wort? My apologies for the home-brewing 101 questions but I really make sure I have as much info as possible before I start my first brew!
I'm now an official AHA member!

Offline tygo

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2622
  • Sterling, VA
    • View Profile
Re: Gravity readings
« Reply #1 on: January 16, 2011, 08:43:36 AM »
You just need something to get in there and grab a sample.  Just do it relatively quickly and sanitize everything that touches the beer before using it.

You can go with some kind of thief like this:  http://www.northernbrewer.com/brewing/3-piece-thief-plastic.html

Or do what I do and use a sanitized turkey baster.  The turkey baster works fine if you're doing five gallon batches in a six gallon carboy.  If your volume is lower you might not be able to reach with the baster.
Clint
Wort Hogs

Fermenting: Wit
On Tap: Lucifer's Hammer Golden Strong Ale, Dopplebock, Old Fuzzynut's Ale

Offline dozer5454

  • 1st Kit
  • *
  • Posts: 2
    • View Profile
Re: Gravity readings
« Reply #2 on: February 09, 2011, 09:04:26 AM »
What about the thought of using a satellite fermenter? (ie: using a spare sanatized beer bottle.  take a sample afer you pitch/mix your yeast.)  Then you can take samples at your leisure.  And not worry about anything getting into that liquid gold.

Offline hokerer

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2639
  • Manassas, VA
    • View Profile
Re: Gravity readings
« Reply #3 on: February 09, 2011, 09:17:07 AM »
What about the thought of using a satellite fermenter? (ie: using a spare sanatized beer bottle.  take a sample afer you pitch/mix your yeast.)  Then you can take samples at your leisure.  And not worry about anything getting into that liquid gold.

In order for your satellite readings to be meaningful, its fermentation must proceed identically to the main fermentation.  The differences in volume, pitch rate, etc. are going to make that pretty tricky to obtain.
Joe

Offline jamminbrew

  • Brewmaster
  • *****
  • Posts: 820
  • theAntipunk
    • View Profile
Re: Gravity readings
« Reply #4 on: February 09, 2011, 09:19:57 AM »
I use a wine thief I purchased at my LHBS for about $10.  Work very well, just sanitize first and don't leave the fermenter open for very long.

And Dozer:  Does the satellite fermenter ferment the same as the larger fermenter?  Does the different weights/volumes affect the wort differently?  Will one ferment faster than the other?
Member, AHA
Member, Brew Brothers of Pikes Peak
BJCP judge# D1248
In caelo cerivisiae nil, hic igitur bibimus.

Offline morticaixavier

  • Official Poobah of No Life.
  • *
  • Posts: 7103
  • Davis, CA
    • View Profile
    • The Best Artist in the WORLD!!!!!
Re: Gravity readings
« Reply #5 on: February 09, 2011, 10:09:57 AM »
I also use a wine theif and have had no problems. As was stated above if you are quick there is not much danger of infection. and as long as you are gentle you will not disturb the CO2 blanket so no worries about O2

Offline dozer5454

  • 1st Kit
  • *
  • Posts: 2
    • View Profile
Re: Gravity readings
« Reply #6 on: February 11, 2011, 08:56:36 AM »
Haven't tried the satalite trick.  I saw it on a You Tube video and thought it might work.  Lol, guess not.  On my bucket lid of my primary i have cut a larger hole and used a bigger stopper with an air lock.  Still ferments just fine.  When i need to take a sample i remove the stopper, grab a sanatized thief and get my sample.  Lid never comes off the bucket.

Offline hmbrewing

  • Cellarman
  • **
  • Posts: 40
    • View Profile
Re: Gravity readings
« Reply #7 on: February 11, 2011, 10:39:19 AM »
You're going to be able to take your sample relatively quickly, especially if you use a wine thief as others have mentioned. The chances of oxygenating your brew in that time are slim to none. I wouldn't fret. I frequently will take 3 readings 3 days apart and have never had problems. Skip the satellite batch: not worth the time as it's not going to be a 100% representation of what's going on in your carboy. Happy brewing!
I brew beer, I drink beer...it really is that simple