Author Topic: Alpha Amylase  (Read 7397 times)

Offline tony

  • Cellarman
  • **
  • Posts: 36
Re: Alpha Amylase
« Reply #15 on: December 01, 2009, 11:00:05 pm »
I use promash and had reset my default to tinseth years ago.

Btw, I tried the carbonation level in a keg I had lagering.
All the world of difference. It tastes like a crisp German
lager it was meant to be.

I'll try increasing the carbonation level on the others.

Offline Thirsty_Monk

  • Brewmaster General
  • *******
  • Posts: 2464
  • Eau Claire WI
    • Lazy Monk Brewing
Re: Alpha Amylase
« Reply #16 on: December 02, 2009, 01:43:34 am »
Sounds like a plan.

Just a word of caution.
If you over carbonate your beer it will turn from crisp to biting.

I try to carbonate to 2.6 volumes.
Na Zdravie

Lazy Monk Brewing

Offline ndcube

  • Brewmaster
  • *****
  • Posts: 612
Re: Alpha Amylase
« Reply #17 on: December 02, 2009, 04:10:36 pm »
1 minute might not be enough aeration. I aerate my lagers for 2-3 minutes with pure 02 through a stone at a very slow trickle in which I move the stone constantly through the wort. You want very few bubbles coming to the surface (aim for none - bubbles mean o2 is escaping.)

What is the size of the pores in your stone?

Offline majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 10940
  • Polka. If its too loud you're too young.
Re: Alpha Amylase
« Reply #18 on: December 02, 2009, 06:04:19 pm »
I believe 2 micron - I have had it for years and years so not exactly sure any more.

Offline narvin

  • Brewmaster General
  • *******
  • Posts: 2562
Re: Alpha Amylase
« Reply #19 on: December 02, 2009, 07:47:37 pm »
I doubt it has anything to do with your mash.

Have you tried German Pilsner malt?  For such a simple beer, a different malt can have a noticeable difference.

Also, you're practically starting with RO water... 1 teaspoon of gypsum is not all that much.  Even though your pH may be in ther right range, you will still probably have an overall low mineral content water.