Author Topic: March pump stir plate alternative  (Read 725 times)

Offline Hydro

  • Cellarman
  • **
  • Posts: 62
    • View Profile
March pump stir plate alternative
« on: January 04, 2011, 09:37:43 PM »
I pulled the pump head off of my March pump and noticed that it is a magnetic coupled pump head.  I am considering testing to see if it can be used as a yeast stir plate motor.  I can install a reostat to control the pump speed.  I am interested in purchasing a magnet that is used in the flask for such a project.  Has any one tried this before?  If so did it work adequately to stir the yeast?   Where can I purchase a magnet for the flask? 
For the Love of Beer,
Hydro

On Tap Now:
1. Irish Red Ale
2. American Amber Ale
3. Kolsch
4. Scotch Ale
5. Strong Scotch Ale
6. Key Lime Pie (11%) Chilled to 29 deg. F. you can not even taste the alcohol.

It is time to start brewing again.

Online a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 3166
  • Ask me why I don't like Chico!
    • View Profile
    • SeanTerrill.com
Re: March pump stir plate alternative
« Reply #1 on: January 04, 2011, 09:42:18 PM »
It's called a "stir bar" and I'd suggest eBay, where you can probably find one for less than $5 including shipping. The more usual sources would be retailers like coleparmer.com and fishersci.com.

You can put together a stir plate for less than $30 though (link). It might be worth it, especially if your pump has the plastic head. Eventually you'll just strip the threads.

Also, if memory serves the magnets in the March pumps surround the impeller. I'm not 100% sure they'd turn a bar that was a few inches removed from the hub.
Beer is like porn. You can buy it, but it's more fun to make your own.
http://seanterrill.com/category/brewing/

Offline euge

  • Official Poobah of No Life.
  • *
  • Posts: 7225
  • Estilo Casero
    • View Profile
Re: March pump stir plate alternative
« Reply #2 on: January 04, 2011, 09:44:22 PM »
On ebay under "stir bar." Get something like a 2" bar. The one inchers won't stir much liquid. Up to you to build the stir plate tho.
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Offline mabrungard

  • Senior Brewmaster
  • ******
  • Posts: 1101
    • View Profile
    • Bru'n Water
Re: March pump stir plate alternative
« Reply #3 on: January 05, 2011, 09:13:02 AM »
Definitely get a big stir bar, 2 inch or plus. I use a 3 inch in a 6L flask.

I'm not really sure the March pump will be able to do what you're asking.  And on top of that, the rotation speed will almost certainly be too high.  You can actually throw the stir bar if you spin too fast.  I don't think a reostat will be able to turn down the power enough to work correctly. 
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water

Offline johnf

  • Brewer
  • ****
  • Posts: 428
    • View Profile
Re: March pump stir plate alternative
« Reply #4 on: January 05, 2011, 10:06:31 AM »
I once got a package of I think 8 sizes of stir bars and 3 of each for $20 on ebay. About 3 of the sizes are useful to me but I do find that different size flasks sometimes work better with a different size bar so I like the flexibility and I definitely like having three of each. Never lost one, have dumped in the fermenter once or twice. I brew often enough that is problematic.

I have two stir plates now, both computer fan types but neither made by me. Even with the 2 liter flask I usually use I find one works better with a bigger bar and one with a slightly smaller.

Offline dak0415

  • Brewer
  • ****
  • Posts: 488
  • Winston-Salem, NC
    • View Profile
Re: March pump stir plate alternative
« Reply #5 on: January 05, 2011, 10:28:35 AM »
I'm not really sure the March pump will be able to do what you're asking.  And on top of that, the rotation speed will almost certainly be too high.  You can actually throw the stir bar if you spin too fast.  I don't think a reostat will be able to turn down the power enough to work correctly. 
You can find ceiling fan speed control units on ebay.  Those will work with shaded pole motors.  I use one for a BIG stirplate (think 3 gallon carboy) and one to control the pump on my rims.
Dave Koenig
Anything worth doing - is worth overdoing!

Offline davidw

  • Cellarman
  • **
  • Posts: 42
    • View Profile
Re: March pump stir plate alternative
« Reply #6 on: January 05, 2011, 10:30:19 AM »
My concern would be that if you slow the pump down using a rheostat it isn't going to cool the motor properly and it would fail prematurely. That's why homebrewers use a ball valve on the output of the pump to control flow vs. slowing down the motor.

Offline Tim McManus

  • Assistant Brewer
  • ***
  • Posts: 236
    • View Profile
    • Haskell Brewing Company
Re: March pump stir plate alternative
« Reply #7 on: January 05, 2011, 04:54:45 PM »
Tim McManus
Haskell, NJ

Offline Thirsty_Monk

  • Senior Brewmaster
  • ******
  • Posts: 1843
  • Eau Claire WI
    • View Profile
Re: March pump stir plate alternative
« Reply #8 on: January 05, 2011, 06:47:27 PM »
How about stirbar.com?
http://www.stirbar.com/

They have any stirbar you could imagine.
Bad thing is that they have minimum order.

Just a thought thou  ;)
Na Zdravie

On Tap At The TapRoom:
Bohemian Pilsner
Bohemian Dark Lager
Smoked Bock
MaiBock
American Brown Ale
Marzen
Root beer