Poll

PID and parts needed

PID wiht SSR
3 (100%)
Something else
0 (0%)

Total Members Voted: 3

Author Topic: PID and parts needed  (Read 593 times)

Offline hiphophead

  • Cellarman
  • **
  • Posts: 25
    • View Profile
PID and parts needed
« on: February 01, 2011, 07:12:43 PM »
im About to put an order into Auber Instruments for this PID http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=3 and this SSR http://www.auberins.com/index.php?main_page=product_info&cPath=2&products_id=30 to go with it to build a heat stick for my newly constructed  RIMS.  but i really have no idea how to wire it up or do anything really with it yet but if theres anything else i need to order in order it get my heatstick going it would be nice to only have to pay for shipping once.  sorry if this is confusing to everyone.  thanks for any input.


Offline dak0415

  • Brewmaster
  • *****
  • Posts: 539
  • Winston-Salem, NC
    • View Profile
Re: PID and parts needed
« Reply #1 on: February 01, 2011, 08:35:21 PM »
The only other thing you will need from auber is some kind of temperature probe.  That unit does not include a thermocouple or RTD.  I have used this one http://www.auberins.com/index.php?main_page=product_info&cPath=15&products_id=46.  Most of the "included" thermocouples are not liquid tight.
Dave Koenig
Anything worth doing - is worth overdoing!

Offline Thirsty_Monk

  • Brewmaster General
  • *******
  • Posts: 2173
  • Eau Claire WI
    • View Profile
Re: PID and parts needed
« Reply #2 on: February 04, 2011, 07:39:42 PM »
hiphophead go to HomeBrewTalk forum.
There is a plenty of info abut electric brewing.
Na Zdravie

On Tap At The TapRoom:
Bohemian Pilsner
Bohemian Dark Lager
Smoked Bock
MaiBock
American Brown Ale
Marzen
Root beer