Membership questions? Log in issues? Email

Author Topic: poor body and head, is it the yeast or the quality of ingredients  (Read 2415 times)

Offline smahler

  • 1st Kit
  • *
  • Posts: 2
So I recently tried buying ingredients from a different supplier than I've used in the past.  I did this for a new recipe and was unhappy with the results - the beer lacked body and head.  But there were a lot of things new to me on that: a new recipe, a new supplier, and I used Danstar Nottingham yeast for the first time. 

I then brewed a simple recipe that I brew fairly often (3 gallons: 3 pounds DME, .5 lbs 40L Crystal, .5 lbs flaked barley, Hallertauand Amarillo), again my ingredients came from this new supplier and I again used Danstar Nottingham, and again the result lacked body and head.  in the past I've used SafAle American Ale yeast.

My question is do you think the problem is more likely caused by the yeast difference or perhaps the quality of the ingredients from the supplier?  I suspect that it is due to the high AA of Nottingham. 

Offline dmtaylor

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4743
  • Lord Idiot the Lazy
    • YEAST MASTER Perma-Living
Re: poor body and head, is it the yeast or the quality of ingredients
« Reply #1 on: March 06, 2011, 02:31:18 pm »
I've used Nottingham ale yeast dozens of times and it's great -- makes award winning beers.  So I seriously doubt that is your problem.

Freshness of ingredients could be part of it.  But most fundamentally:

What is your fermentation temperature?  If you have been fermenting in the upper 60s or 70s, make sure you get it down below 65 F on your next batch, and then report back.  If that ain't it... I'd be surprised.

The world will become a much more pleasant place to live when each and every one of us realizes that we are all idiots.

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27233
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: poor body and head, is it the yeast or the quality of ingredients
« Reply #2 on: March 06, 2011, 03:37:16 pm »
As Dave says, pitching rate and fermentation temp can have a huge impact on beer foam.  The following article not only explains that, it also includes some easy tests you can do to help determine what the problem might be.
Life begins at 60.....1.060, that is!

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell