Author Topic: Harvesting and Growing Yeast from a Commercial Bottle  (Read 948 times)

Offline miguelpanderland

  • Cellarman
  • **
  • Posts: 96
  • Glendale, WI
Harvesting and Growing Yeast from a Commercial Bottle
« on: April 03, 2011, 12:36:13 AM »
In relation to growing a starter via this method, how does one know what one is starting with (number of yeast cells)?

I understand the principles involved with growing a healthy number of cells, but if you're unsure what you're beginning with, how does this work?

Offline a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 4694
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Harvesting and Growing Yeast from a Commercial Bottle
« Reply #1 on: April 03, 2011, 12:43:40 AM »
A finished beer will have, at most, roughly a million cells per milliliter. So if it was stored cold there could be as many as ~350 million cells in a 12 fl oz bottle. More than likely, it's actually less than 100 million. So the key is to start with a very small volume of wort and step up several times. I like to start with 50 mL of wort, then 250 mL, then 1 L, give or take. At that point you should have roughly 50-100 billion cells and you can treat it like a pack or vial.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline miguelpanderland

  • Cellarman
  • **
  • Posts: 96
  • Glendale, WI
Re: Harvesting and Growing Yeast from a Commercial Bottle
« Reply #2 on: April 03, 2011, 01:06:27 AM »
Great information.  Thank you.  That's exactly what I needed to know.

Can't wait to get started on the next adventure in this obsession.....