Author Topic: Measuring gravity to inform when to stop mashing  (Read 2387 times)

Offline nofunsally

  • Cellarman
  • **
  • Posts: 55
    • View Profile
Measuring gravity to inform when to stop mashing
« on: May 09, 2011, 10:44:58 AM »
Hello,
I recently acquired a refractometer. I've been told its great to check the gravity of the wort in the mash and also to know when to stop collecting wort.  Could some one please tell me about checking the gravity pre-boil / mash or point me to the literature? 

I typically get about 75% efficiency into the fermentor from my brews. I use a 48 qt rectangular cooler with a stainless steel braid.

I don't know what to search for to find this information.

Thanks,
Mike

Offline nateo

  • Brewmaster General
  • *******
  • Posts: 2210
  • Denver, CO
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #1 on: May 09, 2011, 11:04:23 AM »
The most common number I've seen is 1.010, meaning stop sparging once your runnings drop below 1.010 SG.
In der Kürze liegt die Würze.

Online narvin

  • Senior Brewmaster
  • ******
  • Posts: 1419
  • Baltimore
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #2 on: May 09, 2011, 11:07:50 AM »
Please do not reply if your an evil alien!
Thanks
Chris S.

Offline tomsawyer

  • Senior Brewmaster
  • ******
  • Posts: 1694
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #3 on: May 09, 2011, 11:21:09 AM »
When I try a new mashing routine I'll check my mash every fifteen minutes and let it go until the Brix quits rising.  This way I know I've got complete conversion or at least as much as I'm going to get.

As for checking during fly sparging, you just check every so often and stop when the sugar content gets low, or you've reached your target volume.  Probably every five minutes would be enough early on, assuming your sparge takes 30+ minutes.

Be sure to rinse off the refractometer each time and dry it with a soft cloth that won't scratch the surface of the glass.
Lennie
Hannibal, MO

Offline nofunsally

  • Cellarman
  • **
  • Posts: 55
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #4 on: May 09, 2011, 12:32:13 PM »
Thank you all for the information.

Maybe this will lead to more predictable results for me.

Cheers,
Mike

Offline weazletoe

  • Brewmaster General
  • *******
  • Posts: 2167
  • Mecca, Ohio
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #5 on: May 09, 2011, 08:21:56 PM »
And, if you have a program like Promash, or do a little simple math, which I do not recall right now (I'm sure someone can help me out here) You can take a preboil gravity, and volume, and see just how long you need to boil to reach your target gravity. or, if your efficency was extra high that brew day, add some water to thin it out. Do this, and you can hit your numbers spot on, every time.
A man works hard all week, so he doesn't have to wear pants all weekend.

Offline sharg54

  • 1st Kit
  • *
  • Posts: 16
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #6 on: May 17, 2011, 12:12:51 AM »
Pre-boil gravity times gallons of wort before boil divided by target gallons after boil is the formula you want.  In others words  a 1.035 pre boil wort of 7 gallons and a target of 5 gallons works like this.
 ( 35 x 7 ) / 5 = 1.049 OG at end of boil.
It works very well just don't forget to adjust your reading on you hydrometer for the temp your checking it at.   

Offline punatic

  • Official Poobah of No Life.
  • *
  • Posts: 4583
  • Puna District, Hawaii Island (UTC -10)
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #7 on: May 17, 2011, 12:33:16 AM »
You can use a parrot:

There is only one success: to be able to spend your life in your own way.


AHA Life Member #33907

Offline sharg54

  • 1st Kit
  • *
  • Posts: 16
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #8 on: May 17, 2011, 12:36:24 AM »
Quote
You can use a parrot:

Now thats a fun looking toy... lol.
Will that drop the temp to 60 degrees where most hydros are calibrated at or will it just stay at room temp?
« Last Edit: May 17, 2011, 12:39:58 AM by sharg54 »

Offline punatic

  • Official Poobah of No Life.
  • *
  • Posts: 4583
  • Puna District, Hawaii Island (UTC -10)
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #9 on: May 17, 2011, 12:45:40 AM »
Quote
You can use a parrot:

Now thats a fun looking toy... lol.
Will that drop the temp to 60 degrees where most hydros are calibrated at or will it just stay at room temp?

The upstream tube is existing a copper liebig condenser.  

Applied to mash runoff - you need to make temperature corrections.

This is an instantaneous way to monitor specific gravity.
« Last Edit: May 17, 2011, 12:50:36 AM by punatic »
There is only one success: to be able to spend your life in your own way.


AHA Life Member #33907

ccarlson

  • Guest
Re: Measuring gravity to inform when to stop mashing
« Reply #10 on: May 17, 2011, 06:10:15 AM »
You can use a parrot:



I was going to say that didn't look like anything related to brewing beer, then I saw the image file location. :D

Offline punatic

  • Official Poobah of No Life.
  • *
  • Posts: 4583
  • Puna District, Hawaii Island (UTC -10)
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #11 on: May 17, 2011, 07:42:54 AM »
It is a simple idea that can be used to monitor runoff gravity if you only have a hydrometer. 
There is only one success: to be able to spend your life in your own way.


AHA Life Member #33907

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 13839
  • Noti OR [1991.4, 287.6deg] AR
    • View Profile
    • Dennybrew
Re: Measuring gravity to inform when to stop mashing
« Reply #12 on: May 17, 2011, 08:28:29 AM »
Quote
You can use a parrot:

Now thats a fun looking toy... lol.
Will that drop the temp to 60 degrees where most hydros are calibrated at or will it just stay at room temp?

I put a gravity sample in a metal cocktail shaker and put that in a bowl of ice water.  In just a minute or so, it's down to 60F.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

Offline jeffy

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2860
  • Tampa, Fl
    • View Profile
Re: Measuring gravity to inform when to stop mashing
« Reply #13 on: May 17, 2011, 09:46:00 AM »
I saw the following invention by a homebrewer once: he glued a hydrometer flask into a plastic bowl (I think it was a spreadable margarine tub), filled the bowl with water and stuck it into the freezer.  I thought that was pretty clever.
Jeff Gladish, Tampa (989.3, 175.1 Apparent Rennarian)
Homebrewing since 1990
AHA member since 1991, now a lifetime member
BJCP judge since 1995

ccarlson

  • Guest
Re: Measuring gravity to inform when to stop mashing
« Reply #14 on: May 17, 2011, 09:54:23 AM »
One word: Refractometer