I have pressured tested 3 kegs after a recent purchase and changing all the gaskets. They all held pressure and I saw no leaks with san star. Once I added the beer and set to 30psi and then I disconnected all lines and placed the kegs in the frig at 40degrees. The next day I wanted to see if it held at 30psi by just hooking gas line, to my surprise on each keg I could hear gas entering the kegs only after 12 hours later. This went on for another day, then I dropped down to 10psi, but the same thing is happening. I tested the beer and its cabonated to my liking.
Is the gas absorbing into the beer or do I have leak?