### Author Topic: Calculating ABV from blended worts  (Read 4714 times)

#### Joe Sr.

• Official Poobah of No Life. (I Got Ban Hammered by Drew)
• Posts: 4467
• Chicago - NORTH SIDE
##### Calculating ABV from blended worts
« on: July 12, 2011, 10:50:00 am »
So I've finally kegged up my old ale.  I overshot the OG (1.12 instead of 1.095).

After it fermented down to 1.044, I split the batch into two separate carboys and added more wort.  The batch I added was a total of 3 gallons (1.5 gallons when to each of the 2.5 of the previous batch) brewed with 4 lbs. DME.

This mix fermented down to about 1.02 (I don't have my notes handy).

So, if I wanted to figure out the final ABV, would I take a weighted average of the two starting gravities and use that to compute with the final final gravity?

If I take a weighted average of the starting gravities, I come out at 1.096, which is right where I wanted to be.  Blind luck, since I didn't calculate this before...

Just curious if anyone has thoughts on the right way to calculate this, since everyone asks how strong it is.

FWIW, it's a damn fine beer.  One batch has been on tap, the other is aging and I think I might bottle it.
« Last Edit: July 12, 2011, 11:12:56 am by Joe Dunne »
It's all in the reflexes. - Jack Burton

#### Jimmy K

• Official Poobah of No Life. (I Got Ban Hammered by Drew)
• Posts: 3643
• Delaware
##### Re: Calculating ABV from blended worts
« Reply #1 on: July 12, 2011, 11:04:58 am »
Weighted average - I don't think there is any other way.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

#### gordonstrong

• Senior Brewmaster
• Posts: 1355
##### Re: Calculating ABV from blended worts
« Reply #2 on: July 12, 2011, 11:11:21 am »
Just curious if anyone has thoughts on the right way to calculate this, since everyone asks how strong it is.

You could just pick a number and tell it to them authoritatively.  That would probably be the easiest answer.

I think the easiest way to get an accurate answer is to just keep track of the total wort volume and the total fermentables in the batch.  If you had the OG and volume of the original batch, figure out the total points present (sounds like 120 * 5 = 600). So you added 3 gallons containing 4 lbs DME.  DME is about 45 points/pound, so you added 180 points.  So you have 600 + 180 = 780 points in 5 + 3 = 8 gallons.  Your adjusted OG is 780/8 = 1.098.

If you fermented that down to 1.020, then your ABV is (1.098 - 1.020) * 131.25 = 10.2%
« Last Edit: July 12, 2011, 11:38:54 am by gordonstrong »
Gordon Strong • Beavercreek, Ohio • AHA Member since 1997 • Twitter: GordonStrong

#### Joe Sr.

• Official Poobah of No Life. (I Got Ban Hammered by Drew)
• Posts: 4467
• Chicago - NORTH SIDE
##### Re: Calculating ABV from blended worts
« Reply #3 on: July 12, 2011, 11:15:05 am »
Gordon - You're correct.  1.02 (edited above).

Glad to see my approach was correct.  If not my typing...
It's all in the reflexes. - Jack Burton

#### a10t2

• Official Poobah of No Life. (I Got Ban Hammered by Drew)
• Posts: 4696
• Ask me why I don't like Chico!
##### Re: Calculating ABV from blended worts
« Reply #4 on: July 12, 2011, 11:32:39 am »
Minor detail check: the OG was 1.120, not 1.112. So the weighted OG is ~1.098, and the ABV is ~10.2%.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

#### gordonstrong

• Senior Brewmaster
• Posts: 1355
##### Re: Calculating ABV from blended worts
« Reply #5 on: July 12, 2011, 11:39:43 am »
Minor detail check: the OG was 1.120, not 1.112. So the weighted OG is ~1.098, and the ABV is ~10.2%.

Thanks. Misread it the first time. Fixed in my post.
Gordon Strong • Beavercreek, Ohio • AHA Member since 1997 • Twitter: GordonStrong