Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Transferring to Lauter Tun  (Read 4465 times)

Offline newrocset

  • Cellarman
  • **
  • Posts: 72
Transferring to Lauter Tun
« on: August 07, 2011, 03:50:56 pm »
Does anybody heat their mash in their boil kettle, then transfer it to another vessel for sparging?  If so, what is your method?  I am planning to do this based on the Pilsner article in the current issue of zymurgy.  I'm going to perform my step mash in my boil kettle, then pour it into my cooler for recirculation and sparging....does this sound like a smart thing to do?  I ussually perform both the mash and sparge in the cooler.
Have a Kolsch and a smile!

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Transferring to Lauter Tun
« Reply #1 on: August 07, 2011, 04:45:06 pm »
Do you have something like a false bottom in the kettle? If not I'd think you'll have problems with scorching. Stirring continuously might work, but that's a LONG time.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline richardt

  • Senior Brewmaster
  • ******
  • Posts: 1227
Re: Transferring to Lauter Tun
« Reply #2 on: August 07, 2011, 06:09:02 pm »
Wouldn't it be easier to just keep it simple?  Do single (or step) infusion mashing in your cooler.  Most modern malted grains are well modified and permit single infusion, though some brewers like a short protein rest if using certain grains (like maris otter).  Lauter using a bazooka screen or SS braid fitted to your cooler (MLT).

Offline thcipriani

  • Assistant Brewer
  • ***
  • Posts: 191
Re: Transferring to Lauter Tun
« Reply #3 on: August 07, 2011, 06:47:49 pm »
while most modern grains are well modified that doesn't mean that a step mash can't offer some benefit. For one thing the glucose/maltose balance is effected by mashing regimen among many other important

My concern would be oxidation of the mash - I think if you could do a gentle transfer you'd be fine; however, I think it's a reasonable idea for you to evaluate why you're step-mashing. If you're doing it for fun or authenticity, that's fine; however, there are better ways to improve your beer.
Tyler Cipriani
Longmont, CO
http://gangsta.party/

Offline newrocset

  • Cellarman
  • **
  • Posts: 72
Re: Transferring to Lauter Tun
« Reply #4 on: August 08, 2011, 08:20:12 am »
while most modern grains are well modified that doesn't mean that a step mash can't offer some benefit. For one thing the glucose/maltose balance is effected by mashing regimen among many other important

My concern would be oxidation of the mash - I think if you could do a gentle transfer you'd be fine; however, I think it's a reasonable idea for you to evaluate why you're step-mashing. If you're doing it for fun or authenticity, that's fine; however, there are better ways to improve your beer.
I never considered Oxidation to be a danger - but you raise a really good point - I guess that's why the recipe says to transfer it with a ladle.

Basically I want to try this method because I want to make Pilsners and Helles Lagers - and the pilsner recipe in the current issue of Zymurgy says to do it this way  :D

The last pilsner I made was an infusion mash and it turned out great...but, it seems to be a common practice to perform a step mash with the lighter beers (i.e. Pilsers, Light Lagers, Wheat), and even though modern malt is modified to the extent that you generally do not need to perform a step mash, people are still doing it, so there is something to it.  In fact, I've been told that Wyermann Bohemian PIlsner Malt is specifically formulated for decoction mashing.

Anyway, I do not have a false bottom, just a cooler with a bazooka, and I find it difficult to perform a step mash with this equipment, even on a small batch.  Basically I would heat the mash water in my Kettle, add the grains, and then step the temp up with spurts of heat while stirring to avoid scorching.
Have a Kolsch and a smile!

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Transferring to Lauter Tun
« Reply #5 on: August 08, 2011, 09:21:59 am »
and the pilsner recipe in the current issue of Zymurgy says to do it this way  :D

You might start by asking yourself why it says that...what benefits will you reap by doing that.  That's kinda the basis I use to make those kinds of decisions.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Transferring to Lauter Tun
« Reply #6 on: August 08, 2011, 09:24:13 am »
Basically I want to try this method because I want to make Pilsners and Helles Lagers

I have it on good authority that you can make an award-winning Helles with a single-infusion mash. ;)
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

ccarlson

  • Guest
Re: Transferring to Lauter Tun
« Reply #7 on: August 08, 2011, 10:01:47 am »
You don't need to ladle it. My brew buddy pours his unboiled wort all  the time and he makes great beer.

Offline kylekohlmorgen

  • Senior Brewmaster
  • ******
  • Posts: 1363
  • Saint Louis, MO
    • The South House Pilot Brewery
Re: Transferring to Lauter Tun
« Reply #8 on: August 08, 2011, 12:43:18 pm »
If you're looking to try new mash procedures AND are doing a Pils - why not try a decoction?

Its not terribly difficult if you watch Kai Troester do it a few times - and all you need is the equipment you already have for SI mashes.

http://www.youtube.com/watch?v=_V1zt0mW084
Twitter/Instagram: @southhousebrew

Recipes, Brett/Bacteria Experiments: http://SouthHouseBeer.com/

Offline hopfenundmalz

  • Global Moderator
  • I must live here
  • *****
  • Posts: 10678
  • Milford, MI
Re: Transferring to Lauter Tun
« Reply #9 on: August 08, 2011, 12:49:51 pm »
A friend mashes in a 10 gallon cooler.  If he needs to do a step mash he adds boiling water.  If the grainbill is too big or he has no more room for infusions, he does a decoction.

Just the way he does it, and he makes excellent beer.  An example of how the procedure is modified to fit the system.
Jeff Rankert
AHA Lifetime Member
BJCP National
Ann Arbor Brewers Guild
Home-brewing, not just a hobby, it is a lifestyle!

Offline MDixon

  • Brewmaster General
  • *******
  • Posts: 2313
Re: Transferring to Lauter Tun
« Reply #10 on: August 08, 2011, 01:31:49 pm »
I transfer to the tun for lauter and use a pot from the kitchen. As to why I do it that way...precise temp control.
It's not a popularity contest, it's beer!

Offline thcipriani

  • Assistant Brewer
  • ***
  • Posts: 191
Re: Transferring to Lauter Tun
« Reply #11 on: August 09, 2011, 02:50:42 pm »
I mash in a 10 Gallon Gott cooler - in a setup probably fairly similar to what you've got - and I think I'd either infuse with boiling water in the cooler, do a decoction mash to hit my temps, try a combination of those two techniques or, most likely, stick with my SOP and single-infusion mash.

Can you make a better beer with a multi-step mash? Maybe. I'm not sure that I could. I don't have any practice with that technique. I wouldn't try what you're proposing because I'd likely never use this technique and would, therefore, never get good-enough at this technique to make better beer than I could with my standard technique. My new mantra is, "Don't fight your system".

I say all of this with the caveat that recently (about a year ago) I decided to branch out and try a ton of new techniques. I think what I found, after 40-some-odd batches of experiments, was that all of these techniques can make amazing beer; however, none of these techniques are the secret to making amazing beer. The secret to making amazing beer, I feel, is perfecting a process that works well for your system. That's my current brewing philosophy FWIW.
Tyler Cipriani
Longmont, CO
http://gangsta.party/

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Transferring to Lauter Tun
« Reply #12 on: August 09, 2011, 04:10:50 pm »
I transfer to the tun for lauter and use a pot from the kitchen. As to why I do it that way...precise temp control.

I guess some people just don't have the skill to control temps in a cooler....;)
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline newrocset

  • Cellarman
  • **
  • Posts: 72
Re: Transferring to Lauter Tun
« Reply #13 on: August 10, 2011, 12:02:23 am »
Thanks for all the advice everyone!

I guess some people just don't have the skill to control temps in a cooler....;)
I generally have good temp control when I'm doing a five gallon batch in my cooler since I have a lot of room to play - but I prefer to do 10 gallon batches for obvious reasons  ;), and that's where I forsee the difficulty of temp control in a cooler....I'll try a few different things and see what I come up with!
Have a Kolsch and a smile!

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Transferring to Lauter Tun
« Reply #14 on: August 10, 2011, 11:25:20 am »
Thanks for all the advice everyone!

I guess some people just don't have the skill to control temps in a cooler....;)
I generally have good temp control when I'm doing a five gallon batch in my cooler since I have a lot of room to play - but I prefer to do 10 gallon batches for obvious reasons  ;), and that's where I forsee the difficulty of temp control in a cooler....I'll try a few different things and see what I come up with!

Makes sense...I was just taking a personal dig at Mike, an old friend....
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell