OK this is confusing
To carb a beer to 2.5 vol @ 45º I need to set the psi 15psi
I have 5' of 3/16" vinyl tubing, which has a resistance of 3 psi per ft.
length = psi / 3
5 = psi/3, or psi=15
yet a10t2 says it will wind up being over carbed, which does seem to be happening, and at15 it really pours too fast.
I set it to 15psi, it pours fast but doesn't foam up if I am careful.
I'm guessing it hasn't had time to equalize yet. In 2-3 days it'll probably be over-carbed.
I have a dual regulator and I have another beer I want to keg today
This one I want carbed to 1.5 volumes which means I have to carb it at 3 psi yet serve it @ 15??
Certainly can't serve it at 3?
Or serve it at 3 psi with 1' of beer line? 3/3=1 ?
That's what I was getting at back when I said about changing line length for different carb levels.