Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Pumpkin Ale  (Read 10735 times)

Offline Jimmy K

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3643
  • Delaware
Re: Pumpkin Ale
« Reply #15 on: October 18, 2011, 06:53:47 am »
I think a pumpkin saison sounds great - something a little different in the fall pumpkin lineup. I'd reduce the spicing to let the yeast spiciness come through, and maybe switch up the spices with some less conventional ones (less conventional for pumpkin anyway) or consider eliminating them altogether.  WLP566 or 568 might be good choices with their clove character.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Pumpkin Ale
« Reply #16 on: October 18, 2011, 08:23:19 am »
I seem to have to repeatedly pull out this info on pumpkin. I don't see any benefit to mashing.

It isn't that I want the sugars per se. I'm just concerned about dumping that much starch into the boil.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline snowtiger87

  • Brewer
  • ****
  • Posts: 443
Re: Pumpkin Ale
« Reply #17 on: October 18, 2011, 10:59:39 am »
MDixon,

Thanks for the data. I have never looked at it that way. How about this technique if people still don't want to put the pumpkin in the boil (I don't)?

Before sparging gently mix it into the top of the grain bed. Let it sit for 10 minutes or so and then start then sparge, or mash-out, then sparge.

This way it should not plug up the filter, but the process of sparging should still extract the color and sugar from the pumpkin, and the 10 minute rest may even convert what little starches are there.
« Last Edit: October 18, 2011, 11:01:57 am by snowtiger87 »
Brewing since 1989 - BJCP National Rank
Member of KROC and Foam on the Range

Fermenting: Double IPA
Conditioning: Saison du Potiron
On tap: Cider, Cream Ale, Bock, Rye Dunkel Doppelbock, Celebration Clone, Imperial Stout

Offline BrewinSB

  • Cellarman
  • **
  • Posts: 45
Re: Pumpkin Ale
« Reply #18 on: October 19, 2011, 08:34:58 pm »
Wow, yeah, great information.  Seems like it isn't really worth the trouble of putting it in the mash.

MDixon,

Thanks for the data. I have never looked at it that way. How about this technique if people still don't want to put the pumpkin in the boil (I don't)?

Before sparging gently mix it into the top of the grain bed. Let it sit for 10 minutes or so and then start then sparge, or mash-out, then sparge.

This way it should not plug up the filter, but the process of sparging should still extract the color and sugar from the pumpkin, and the 10 minute rest may even convert what little starches are there.

That's an interesting idea.  I am brewing this weekend so I need to make up my mind on how to do this.

Offline bwedemey

  • 1st Kit
  • *
  • Posts: 2
Re: Pumpkin Ale
« Reply #19 on: October 30, 2011, 12:12:04 am »
Just made one, we used three 15oz cans one can at the beginning of the boil another with 10 min left and the third in the second fermentation.  I think we over did it a bit and don't think the first can was necessary but it turned out great! be sure there are no preservatives in the pumpkin as they hinder fermentation.   

Offline MDixon

  • Brewmaster General
  • *******
  • Posts: 2313
Re: Pumpkin Ale
« Reply #20 on: October 31, 2011, 11:03:03 am »
Now you made an interesting point and may not know it. Why not, if you are gonna add the pumpkin anyway, just add it to the primary fermenter. If you sanitize (and perhaps clean) the exterior of the can the pumpkin in the can should already be sanitary.

It would be interesting to take a low hopped pale ale and add a can of pumpkin with no spices to one fermenter and do nothing to the other and then determine if one could perceive the pumpkin other than visually. I've always felt the spices drive the flavor in most pumpkin beers, but it might be worth a while. I may actually try this the next time I crank out a Saison to see what happens. Thanks for the idea...
It's not a popularity contest, it's beer!

Offline BrewinSB

  • Cellarman
  • **
  • Posts: 45
Re: Pumpkin Ale
« Reply #21 on: November 16, 2011, 10:01:03 pm »
I kegged my pumpkin ale on 11/16 using the following recipe.
3 lbs Two row
3 lbs Maris Otter
1 lbs Victory
8 oz Cystal 60L
8 oz Rye Malt
3.5 lbs canned pure pumpkin puree (in the mash)
Handful of rice hulls
.25 oz Magnum 60 min
.25 oz Fuggles 30 Min
.25 oz EKG 30 min
1 t. cinnamon (5 min)
1/2 t. allspice (5 min)
1/2 t. ground ginger (5 min)
1/4 t. nutmeg (5 min)
1/4 t. clove (5 min)
WLP002 (1L Starter)

Single infusion mash at 151 (Post-Boil OG:  1.046).  I fermented for 3 weeks at 68 F (FG:  1.011), crash cooled to 40 F for two nights and kegged it. 

I tasted it today (after 2 days of carbonating) and it is still a bit under carbonated as I would expect.  However, I am noticing so far it tastes watery.  Why would this be?

Offline BrewinSB

  • Cellarman
  • **
  • Posts: 45
Re: Pumpkin Ale
« Reply #22 on: November 17, 2011, 09:19:35 pm »
I made my pumpkin beer with an amber ale recipe and a couple roasted pumpkins added in.
But, instead of doing the spices in the boil, I went with the tincture method which worked very well.  1/2 tsp of fresh grated cinnamon, fresh grated nutmeg and fresh ground all spice with a just a dash of ginger and a little shot of vanilla extract placed in 1/2 cup of vodka.  I let it sit for a day and then added it slowly to kegged beer and tasted until I got the spices I wanted.  I also put in 1 lb of brown sugar in the boil just to try to copy that pie sweetness and it seemed to work well.  Plus I used WLP002 which left some sweetness in the beer.

I also made 10 gals but only spiced 5 and after it has sat for a couple days, I'll have a few tasters give me their opinion and then if the spices need to be adjusted, I can either add more or blend in more beer to reduce the intensity.

When you added your tincture to your keg, was it carbed up already?  I tasted mine and feel it needs a bit more spice, but it has been carbing up for a few days now.  Would I still be able to add a spice tincture?

Offline gmac

  • Brewmaster General
  • *******
  • Posts: 2165
  • London, Ontario
Re: Pumpkin Ale
« Reply #23 on: November 18, 2011, 09:24:08 pm »
Yes, mine was carbed although at a low level since it was only on the gas for a couple days when I did it. 
One thing I've found since is that even though I strained the tincture, there was enough finely ground spice that got through the cloth to bump up the taste a bit more after it was in the carboy. 
I tried a coffee filter first but it was just too slow and not really working.

I can't see how it would hurt to add it after carbing.  Vent off the gas, open it up and add it.  May take a bit to get the tincture distributed unless you roll it around a bit which chould make it a bit gassy when you poured but that's about all I can think would happen (assuming you don't oxygenate the heck out of it).
Good luck.