Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Extract Kit Boil Volume Question  (Read 2041 times)

Offline robertpreed

  • Cellarman
  • **
  • Posts: 48
Extract Kit Boil Volume Question
« on: November 14, 2011, 01:39:40 pm »
I have an Irish Blonde Ale that is in secondary fermentation and despite some misgivings on brew day, seems to be doing well.   In the kit, it has me boil 2.5 gallons of water and use cold water to fill up fermenter to 5 gallons.   I had a brain fart and only boiled with 2 gallons, so the brew is more of a red head than a blonde, but I do not think that will alter the flavor greatly in a negative way.   Hey, it is my first brew after a 10 year layoff due to moving to Houston.

Anyway, I was wondering if I boiled more volume (say 4/5 gallons) would that be a good thing, neutral thing, or bad thing for my next extract kit from Northern Brewer?

Thanks.

Offline tschmidlin

  • I must live here
  • **********
  • Posts: 8198
  • Redmond, WA
Re: Extract Kit Boil Volume Question
« Reply #1 on: November 14, 2011, 01:48:15 pm »
Boiling as much of your batch as possible is usually a good idea for bitterness extraction efficiency and to minimize wort darkening, but I've heard some of the kits are formulated with a partial boil in mind.  I'm not sure about the NB kits, maybe someone else knows.
Tom Schmidlin

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Extract Kit Boil Volume Question
« Reply #2 on: November 14, 2011, 01:54:40 pm »
The NB kits do assume a partial boil. If you have the capability to do a full boil, go for it. Just reduce the bittering addition by about 1/3 to keep the IBU about where the recipe intends. You could also do a partial boil but only add half the extract at the beginning of the boil, and the rest at the end. In that case you'd still want to reduce the bittering charge.

In truth, though, it's going to be difficult to brew a blonde-colored beer using extract, no matter what you do.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline morticaixavier

  • I must live here
  • **********
  • Posts: 7781
  • Underhill VT
    • The Best Artist in the WORLD!!!!!
Re: Extract Kit Boil Volume Question
« Reply #3 on: November 14, 2011, 02:13:59 pm »
The NB kits do assume a partial boil. If you have the capability to do a full boil, go for it. Just reduce the bittering addition by about 1/3 to keep the IBU about where the recipe intends. You could also do a partial boil but only add half the extract at the beginning of the boil, and the rest at the end. In that case you'd still want to reduce the bittering charge.

In truth, though, it's going to be difficult to brew a blonde-colored beer using extract, no matter what you do.

What if you boiled just water, any specialty grain tea and hops for say 30-45 minutes then added extract only for the last 15-30. That should significantly reduce coloring shouldn't it?
"Creativity is the residue of wasted time"
-A Einstein

"errors are [...] the portals of discovery"
- J Joyce

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27070
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Extract Kit Boil Volume Question
« Reply #4 on: November 14, 2011, 02:34:44 pm »
What if you boiled just water, any specialty grain tea and hops for say 30-45 minutes then added extract only for the last 15-30. That should significantly reduce coloring shouldn't it?

That's kinda the way NB has you do it.  In the kit for the extract version of my rye IPA they have you steep the grains, then add 1/3 of the extract.  Hops to schedule and the other 2/3 of the extract 15 min. from the end of boil.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline robertpreed

  • Cellarman
  • **
  • Posts: 48
Re: Extract Kit Boil Volume Question
« Reply #5 on: November 14, 2011, 02:52:24 pm »
What if you boiled just water, any specialty grain tea and hops for say 30-45 minutes then added extract only for the last 15-30. That should significantly reduce coloring shouldn't it?

That's kinda the way NB has you do it.  In the kit for the extract version of my rye IPA they have you steep the grains, then add 1/3 of the extract.  Hops to schedule and the other 2/3 of the extract 15 min. from the end of boil.

Yeah, a lot of the kits has partial boils for the extract.   The irish blonde did not and I was wondering how a brown preboil wort was going to make a blonde beer.   That did not add up to me, but hey, blonde/red....... I like them both.    Wait, we are still talking about the beers, right?

I did not know that if I boiled more volume, I would need to decrease the hops to keep the finished product in the same IBU range.   That's interesting.