Juice & Strain: Cider Making of the Future

As a homebrewer, if you’ve found yourself with a surplus of homegrown apples, chances are you’ve considered fermenting your own cider. Cider making resources generally introduce the pulp and press technique for extracting juice—a process involving equipment used to grind up raw apples and press the resulting pulp for juice.

For many aspiring cider makers, the cumbersome and pricey equipment is enough to declare defeat, but Nevin Stewart would advise you otherwise.

“My method is going to revolutionize small scale, clear apple juice making,” declares Stewart.

Where there are Apples, there are Surplus Apples

Over the years, Stewart saw his neighbor hauling bushels of apples from a backyard tree to the compost pile, although a better option than the garbage, he knew they could be used in a better way. In 2011, with an exceptionally large crop of apples—over 661 pounds—Stewart was inspired to transform the unknown variety of culinary apples into a tasty, dry cider.

The pulp and press technique was out of the question, as the money and space required for the necessary equipment exceeded what he and his neighborhood chums were willing to contribute.

“The cost and size of a good pulp and press kit is an entry barrier for many,” said Stewart. With a doctorate in chemistry and experience developing innovative products and processes for British Petroleum, he set out to develop a way to produce delicious cider at home without breaking the bank.

Appliance Compliance

Cider is simple, much like wine. It consists primarily of the fermentable juice from whole fruit and the yeast that transforms sugars into alcohol and CO2. As mentioned, the biggest barrier for hobby cider makers is the equipment, so an alternative means of extracting juice was the biggest hurdle.

Initially, Stewart tried a second-hand juicer designed for processing seedless fruit slices. Clear, delicious apple juice was in fact produced, but it came at a cost.

“In the first attempt, it took three of us three hours to produce three demijohns [1.18 gallons each] full of juice. With 600 pounds of apples available, this approach was just not practicable,” reflects Stewart.

A plethora of juicers were tested, and the ideal appliance could quickly process whole apples with seeds, while still producing relatively clear apple juice. Most whole-fruit processors will suffice, and a thorough cleaning will keep it running like new throughout the cider making season.

The Juice is Worth the Squeeze

Most whole fruit juicers tested would produce about 1.18 gallons of fresh cider from about 17.6 pounds of apples—a 60-65% juice yield by weight.

The whole fruit processors sped up the process significantly, eliminating the need to prepare the apples beyond a thorough cleaning. On average, one person on a high power (1200W+) whole fruit juicer can produce 8.5 gallons of fresh apple juice an hour.

On a small scale—a few tens of gallons—the juice and strain method can yield considerably higher volumes of juice compared to the usual hand cranked pulp and press technique.

Solid to Liquid

To maximize juice yield and promote clarity, Stewart’s cider making process involves straining to separate solids from the liquid.

The juice that is produced from the juicer is fed through tubing into a bucket rigged with filtration. A fine-mesh bag layers a smaller bucket with holes drilled in the bottom to catch the solids while allowing the juice to collect in the large bucket.

As a means of speeding up this process and maximizing yield, Stewart is considering yet another bucket that would sit atop the pulp fines in the mesh bag, pressing the liquid out with the use of pressure instead of relying solely on gravity.

Juice & Strain

Because this method involves processing apples with a juicer and then straining to produce clear, solid-free juice, Stewart appropriately named his technique “juice and strain.”

Equipment

Here is a list of the essentials for conducting juice and strain at home. The size of equipment will depend on the volume of cider you plan to make:

  • Household juicer: whole fruit processors with a round “juice-out” spout are ideal.
  • 2 large buckets: one for collecting juice and one for pomace.
  • Smaller bucket: this will have holes drilled in the bottom and used as a straining aid.
  • Mesh bag: this will fit inside the smaller bucket and be used to strain any solids from the extracted juice.
  • Food-grade tubing: this is attached to the round “juice-out” spout of the juicer and prevents the loss of juice by spillage. A means of attaching, such as a clamp, may be necessary.
  • Fermenter
  • Airlock (and bung, if necessary)

Step By Step

Juice and strain still has room to be refined, but the following steps will produce delicious apple juice that can be shared with all ages or fermented into a crystal clear, dry cider for the adult folk. Non-fermented juice can also be frozen and stored.

  1. Thoroughly wash and rinse apples. Do not use windfall apples, as they may be contaminated with bacteria.
  2. Clean and sanitize all equipment and your cider making area.
  3. Set up one bucket for collecting juice and one for pomace. Place the smaller bucket (with holes drilled in the bottom) within a larger bucket. In the smaller bucket, place the mesh bag. The pommace bucket is simply an empty, large bucket.
  4. Set up the juicer. Attach the tubing to the “juice-out” spout and have it feed into the mesh bag of the juice bucket.
  5. Process the apples in the juicer, emptying the pomace from juicer’s filter into the pomace bucket as necessary.
  6. Once all apples are processed, allow the contents in the straining bucket to drain until no more juice appears to be dripping. The bag can be wrung out to get the last few percent of juice.
  7. Transfer the juice into a clean and sanitized fermenter.
  8. Pitch the yeast according to its instructions. Stewart uses Saccharomyces bayanus, yeast typical in wine and cider fermentations.
  9. Ferment until dry. Stewart ferments at room temperature (18-20°C; 64.5-68°F) and will bottle once the gravity has dropped to or below 1.000.
  10. Bottle or keg after ensuring fermentation has ceased. Cider can be “still” (un-carbonated) or “sparkling” (carbonated). For sparkling cider, priming can be achieved in much the same way when bottling beer.
Homebrewers Association
Homebrewers Association