Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Hopshot IBU Calculator - For Late Kettle Additions  (Read 4969 times)

Offline UnequivocalBrewing

  • Cellarman
  • **
  • Posts: 70
Hopshot IBU Calculator - For Late Kettle Additions
« on: January 31, 2017, 06:55:23 am »
Hi - there is not a lot of information about hop extract utilization.  The best information I've found is that 1ml of hopshot will provide ~10 IBU in 5 gallons of 1.050 gravity wort for a 60 minute boil.  There is also this nice chart from Northern Brewer that adjusts for different gravities:

https://www.northernbrewer.com/documentation/hopshot.pdf

Does anyone know of a way to calculate the IBU for a 15 minute, 5-minute, or even a flame-out addition?

Thanks!

Offline Stevie

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 6858
Hopshot IBU Calculator - For Late Kettle Additions
« Reply #1 on: January 31, 2017, 07:37:58 am »
Most I have used are around 61% aa. 1ml is a bit more than a gram, maybe 1.2. Just do the math from there.

Unless you are using the "variety specific" extracts, I wouldn't add it later than 30 minutes.

Offline UnequivocalBrewing

  • Cellarman
  • **
  • Posts: 70
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #2 on: January 31, 2017, 08:55:41 am »
I'm not sure I'm following the approach on the calculations.  Can you explain a little more?  Thanks

As for the "variety specific" I totally get it.  Most of the stuff available to homebrewers is just hopshot and sometimes you get the variety but it's whatever high AA hop they use.  I know YCH does the variety specific stuff with their resinate products.  Does anyone know where homebrewers can get their hands on this stuff?

Offline Stevie

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 6858
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #3 on: January 31, 2017, 09:01:47 am »
If you are using software, enter it as 1.2g/1ml at 61%

Offline erockrph

  • I must live here
  • **********
  • Posts: 7839
  • Chepachet, RI
    • The Hop WHisperer
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #4 on: January 31, 2017, 09:23:50 am »
I haven't used them yet, but here is where I got my varietal hop extracts:

http://www.farmhousebrewingsupply.com/ibu-injectors/
Eric B.

Finally got around to starting a homebrewing blog: The Hop Whisperer

Offline HoosierBrew

  • I must live here
  • **********
  • Posts: 13031
  • Indianapolis,IN
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #5 on: January 31, 2017, 10:44:20 am »
I haven't used them yet, but here is where I got my varietal hop extracts:

http://www.farmhousebrewingsupply.com/ibu-injectors/


Are these the ones you use for late or keg hopping, I assume?
Jon H.

Offline UnequivocalBrewing

  • Cellarman
  • **
  • Posts: 70
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #6 on: January 31, 2017, 11:19:57 am »
Thanks.  I got it now.  I didn't see the hopshot in Beersmith when I first saw it.  Now I've got it.

Do you know who is the manufacturer of these IBU injectors?

Offline Stevie

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 6858
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #7 on: January 31, 2017, 11:42:20 am »
He just added it in the 2.3 release. I had to use grams in the previous release.

Offline UnequivocalBrewing

  • Cellarman
  • **
  • Posts: 70
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #8 on: January 31, 2017, 11:43:36 am »
BSG is the supplier for these FarmHouse IBU Injectors...

Offline erockrph

  • I must live here
  • **********
  • Posts: 7839
  • Chepachet, RI
    • The Hop WHisperer
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #9 on: January 31, 2017, 01:34:17 pm »
I haven't used them yet, but here is where I got my varietal hop extracts:

http://www.farmhousebrewingsupply.com/ibu-injectors/


Are these the ones you use for late or keg hopping, I assume?
Right. I've tried late hopping with the generic hop shot and got no significant hop flavor or aroma from it.

Sent from my XT1585 using Tapatalk

Eric B.

Finally got around to starting a homebrewing blog: The Hop Whisperer

Offline HoosierBrew

  • I must live here
  • **********
  • Posts: 13031
  • Indianapolis,IN
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #10 on: January 31, 2017, 01:39:46 pm »
I haven't used them yet, but here is where I got my varietal hop extracts:

http://www.farmhousebrewingsupply.com/ibu-injectors/


Are these the ones you use for late or keg hopping, I assume?
Right. I've tried late hopping with the generic hop shot and got no significant hop flavor or aroma from it.



Cool. I'll be picking up a few varietals to test out. Thanks, Eric!
Jon H.

The Beerery

  • Guest
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #11 on: January 31, 2017, 01:43:04 pm »
I haven't used them yet, but here is where I got my varietal hop extracts:

http://www.farmhousebrewingsupply.com/ibu-injectors/


Are these the ones you use for late or keg hopping, I assume?
Right. I've tried late hopping with the generic hop shot and got no significant hop flavor or aroma from it.

Sent from my XT1585 using Tapatalk

With my process and methods, I do get a noticeable aroma from the hop extract even when added at 60 minutes.
Just another data point.

Offline HoosierBrew

  • I must live here
  • **********
  • Posts: 13031
  • Indianapolis,IN
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #12 on: January 31, 2017, 01:57:38 pm »
I haven't used them yet, but here is where I got my varietal hop extracts:

http://www.farmhousebrewingsupply.com/ibu-injectors/


Are these the ones you use for late or keg hopping, I assume?
Right. I've tried late hopping with the generic hop shot and got no significant hop flavor or aroma from it.

Sent from my XT1585 using Tapatalk

With my process and methods, I do get a noticeable aroma from the hop extract even when added at 60 minutes.
Just another data point.


Good aromas, though? These are the ones you use?
Jon H.

The Beerery

  • Guest
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #13 on: January 31, 2017, 02:00:46 pm »
I haven't used them yet, but here is where I got my varietal hop extracts:

http://www.farmhousebrewingsupply.com/ibu-injectors/


Are these the ones you use for late or keg hopping, I assume?
Right. I've tried late hopping with the generic hop shot and got no significant hop flavor or aroma from it.

Sent from my XT1585 using Tapatalk

With my process and methods, I do get a noticeable aroma from the hop extract even when added at 60 minutes.
Just another data point.


Good aromas, though? These are the ones you use?

I use a generic bittering one for most of my beers. My best descriptor is tastes like hops 8). No I don't know I add at 60 and there is a hint of floral character for me, its actually really nice and subtle, its great in styles that only call for a 60 minute bittering addition.

Offline Stevie

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 6858
Re: Hopshot IBU Calculator - For Late Kettle Additions
« Reply #14 on: January 31, 2017, 02:03:24 pm »
That's good to know. I was going to use 5ml hop shots for some hoppy pilsners I have planned. Glad to hear they aren't to rough.