[czechxpress]

Hey guys,

Got a 7 gal brewmaster SS brew bucket.  To order the parts from SS to make it do a pressure transfer its around $100... anyone have a cheaper way to make it happen? 

Thanks! 

[BrewBama]

Here’s one way I’ve seen. http://brulosophy.com/2017/09/11/the-impact-of-cold-side-oxidation-on-new-england-ipa-exbeeriment-results/


Sent from my iPad using Tapatalk

[czechxpress]

Thanks!  Don't think you could find a cheaper way to do it. 

[narcout]

Here's what I did:

[czechxpress]

What parts were used in the bung?  that's the best I've seen so far.

Thanks!

[mabrungard]

I bought a $13 gas-in fitting for a bulkhead application and fitted it to my lid. Plugging a gas line into the bung would be just about as good.

[narcout]

What parts were used in the bung?  that's the best I've seen so far.

Thanks!

There are links in the thread below, but I'm not sure they are all still valid.

https://www.homebrewersassociation.org/forum/index.php?topic=20241.0

There are 3 pieces besides the stopper: a 1/4" barb to flare, a keg post adapter (screws onto the flare), and a type B gas post.  The hole on a drilled #2 stopper is too big for the 1/4" barb, so I bought a solid stopper and drilled it myself.

You could also try something like this: https://www.ebay.com/itm/Ball-Lock-Post-LIQUID-Poppet-Valve-Cornelius-Beer-Keg-Homebrew/252600608584?hash=item3ad02b6748:g:KRoAAOSwR8haaTun

But see Reply #21 in this thread: https://www.homebrewersassociation.org/forum/index.php?topic=29237.15